Printronix Integrated Network Interface Card manual For Wireless NIC with Symbol RF cards only 250

Chapter 12 Complete Command List

<len-type> indicates the selected preamble length ("long", "short"or "default").

<sleep-time> indicates the power-save sleep-time in milliseconds.

If power-save is disabled (time is set to zero), "normal (power-save off)" displayd.

<key-num> is the number identifying one of the four encryption keys, starting from one. Encryption is disabled if "Encryption disabled" displayd.

<auth-method>is the authentication method e.g. open, shared, kerb, leap.

<auth-user-name>is the authentication method user name.

<auth-password>is the authentication method password.

<power> is a percentage indicating the approximate fraction of full power.

<option-list> is a list of options that are enabled (disabled options are not shown).

<profile> is the 802.11g/b wireless mode in use.

<wpa-mode>is the WPA wireless mode selected.

<wpa-cipher>is the selected WPa cipher setting.

<wpa-passphrase>is the WPA passphrase represented as * characters if configured.

<country-code>is the currently configured country setting that is used to determine valid channel settings with which the 802.11g wireless NIC is used to communicate with an access point.

<status> is the current access point association status (“disassociated” or “associated with <MAC address>”)

<comms-quality> indicates the strength or quality (in percent) of the wireless signal.

NOTE: The "list stored ifc" command does not display the "Status" or "Quality" lines.

list kerberos

For Wireless NIC with Symbol RF cards only.

250