Printronix Integrated Network Interface Card manual Windows NT 4.0 Or 2000 Host Setup Problems

Windows NT 4.0 Or 2000 Host Setup Problems

The Ethernet cable is not plugged in or the printer is not turned on. This message is a communication failure between the NT/2000 server and the NIC. Check cabling, IP address settings, gateway, etc.

•Test page does not print or prints incorrectly:

1.Is the printer online? Re-send test page.

2.The print queue name should be d1prn; however, the name can be changed. To verify the queue names, print an E-Net Test Page. Refer to your User's Manual for information.

3.The Printronix NT print driver requires P-Series emulation active on the printer. The Generic/Text driver should print in any printer emulation.

4.Delete then re-install the Microsoft TCP/IP Print service on the server.

If you are still experiencing difficulty accessing or browsing the printer, contact the Customer Solutions Center for further assistance.

275