Configuration Checklist
7.Create or verify the existence of an AS/400 TCP/IP interface for NIC. See “Configuring An AS/400 TCP/IP Interface With ADDTCPIFC” on page 160.
8.The next step depends on your AS/400 release. Configure your printer with one of these procedures:
•“Configuring PSF/400 For IPDS On V3R2” on page 162.
•“Configuring PSF/400 For IPDS On V3R7 And Above” on page 168.
9.Notice that when the IPDS feature is installed, the queue name ‘d4prn’ is not available.
10.Verify the printer is ON using the VFYCFG command.
11.Verify that TCP/IP has been started using the STRTCP command.
12.Test your configuration. See “Verifying The IPDS Configuration On AS/400” on page 180.
13.To share the printer on the network, verify that the necessary parameters have been set correctly. See “Sharing The AS/400 Printer On The Network” on page 181.
14.If you have problems, refer to “AS/400 Troubleshooting” on page 185.
159
