TCP/IP Access Problem
Front Panel Message – Dynamically Set Params Read Only
TCP/IP Access Problem
If you can ping the printer from a workstation, but you cannot Web browse, Telnet, or print to the printer through the NIC, there may be an incorrect entry in the TCP access list. So that the workstation can use the NIC in this case, one of two things must happen:
•the TCP list must have an entry added to grant access to this workstation, or
•all entries must be deleted from the TCP list to grant all workstations/hosts access to the above TCP services.
To view the current access list, use the printer control panel to access the menu. See the User's Manual for configuration menu information. From the Operator Print Test menu, choose the Ethernet Test Page. When the page prints, look under the “TCP ACCESS TABLE” section for the TCP access list entries.
To add/delete a TCP access list entry, refer to “TCP Access Lists” on page 259.
281
