Configuring AFP with CRTPSFCFG on V4R3 and Above (Optional)
Edge orient | *NO | *YES, *NO |
Use outline fonts | *NO | *YES, *NO |
PSF defined option | *NONE |
|
| + for more values |
|
Font substitution messages | *YES | *YES, *NO |
Capture host fonts at printer | *NO | *NO, *YES |
Font resolution for formatting ... | *SEARCH | *SEARCH, 240, 300 |
Font mapping table | *NONE | Name, *NONE |
Library |
| Name |
Cut sheet emulation mode | *NONE | *NONE, *CHKFIRST, *CHKALL |
Use DBCS simulation fonts | *NO | *YES, *NO |
Replace | *YES | *YES, *NO |
Authority | *LIBCRTAUT | Name, *LIBCRTAUT, |
|
| *CHANGE... |
|
|
|
Figure 45. Example CRTPSFCFG Command (V4R2 and above)
3.The following parameters are recommended: PSF configuration (PSFCFG)
The name used for this PSF configuration object. The name must match the
PSF configuration (PSFCFG)
The name used for this PSF configuration object. The name must match the
IPDS pass through (IPDSPASTHR)
To print SCS files, specify *YES, PSF transforms SCS into IPDS before printing.
175
