Juniper Networks J-Series Monitoring CoS Value Aliases, Show class-of-service code-point-aliases

Chapter 7: Monitoring the Router and Routing Operations

Table 58: Summary of Key CoS Classifier Output Fields (continued)

CoS Value Type	The classifiers are displayed by type:
	■	dscp—All classifiers of the DSCP type.
	■	dscp ipv6—All classifiers of the DSCP
		IPv6 type.
	■	exp—All classifiers of the MPLS EXP
		type.
	■	ieee-802.1—All classifiers of the IEEE
		802.1 type.
	■	inet-precedence—All classifiers of the
		IP precedence type.
Index	Internal index of the classifier.
Incoming CoS Value	CoS value of the incoming packets, in bits.
	These values are used for classification.
Assign to Forwarding Class	Forwarding class that the classifier assigns
	to an incoming packet. This class affects the
	forwarding and scheduling policies that are
	applied to the packet as it transits the router.
Assign to Loss Priority	Loss priority value that the classifier assigns
	to the incoming packet based on its CoS
	value.

Monitoring CoS Value Aliases

To display information about the CoS value aliases that the system is currently using to represent DSCP, DSCP IPv6, MPLS EXP, and IPv4 precedence bits, select Monitor>Class of Service>CoS Value Aliases in the J-Web interface, or enter the following CLI command:

show class-of-service code-point-aliases

Table 59 on page 126 summarizes key output fields for CoS value aliases.

Using the Monitoring Tools ■ 125