Juniper Networks J-Series manual PPPoE Version

J-series™ Services Router Administration Guide

Table 78: Summary of Key PPPoE Output Fields (continued)

Field	Values	Additional Information
Packet Type	Packets sent and received during the PPPoE
	session, categorized by packet type and packet
	error:
	■ PADI—PPPoE Active Discovery Initiation
	packets.
	■ PADO—PPPoE Active Discovery Offer
	packets.
	■ PADR—PPPoE Active Discovery Request
	packets.
	■ PADS—PPPoE Active Discovery
	Session-Confirmation packets.
	■ PADT—PPPoE Active Discovery Terminate
	packets.
	■ Service Name Error—Packets for which the
	Service-Name request could not be honored.
	■ AC System Error—Packets for which the
	access concentrator experienced an error in
	processing the host request. For example,
	the host had insufficient resources to create
	a virtual circuit.
	■ Generic Error—Packets that indicate an
	unrecoverable error occurred.
	■ Malformed Packet—Malformed or short
	packets that caused the packet handler to
	disregard the frame as unreadable.
	■ Unknown Packet—Unrecognized packets.
Sent	Number of the specific type of packet sent from
	the PPPoE client.
Received	Number of the specific type of packet received by
	the PPPoE client.
Timeout	Information about the timeouts that occurred
	during the PPPoE session.
	■ PADI—Number of timeouts that occurred for
	the PADI packet.
	■ PADO—Number of timeouts that occurred
	for the PADO packet. (This value is always 0
	and is not supported.
	■ PADR—Number of timeouts that occurred
	for the PADR packet.
Sent	Number of the timeouts that occurred for PADI,
	PADO, and PADR packets.
PPPoE Version
Maximum Sessions	Maximum number of active PPPoE sessions the
	Services Router can support. The default is 256
	sessions.

150■ Using the Monitoring Tools