Juniper Networks J-Series manual Monitoring Mpls Rsvp Interfaces Information, Show rsvp interface

J-series™ Services Router Administration Guide

Table 67: Summary of Key RSVP Session Information Output Fields (continued)

Field	Values	Additional Information
Transit LSP	Information about transit RSVP sessions.	MPLS learns this information by querying RSVP,
		which holds all the transit and outbound session
		information.
To	Destination (outbound router) of the session.
From	Source (inbound router) of the session.
State	State of the path: Up, Down, or AdminDn.	AdminDn indicates that the LSP is being taken
		down gracefully.
Rt	Number of active routes (prefixes) installed in the	For inbound RSVP sessions, the routing table is
	routing table.	the primary IPv4 table (inet.0). For transit and
		outbound RSVP sessions, the routing table is the
		primary MPLS table (mpls.0).

Style	RSVP reservation style. This field consists of two
	parts. The first is the number of active
	reservations. The second is the reservation style,
	which can be FF (fixed filter), SE (shared explicit),
	or WF (wildcard filter).

This field is used for outbound and transit LSPs only.

Labelin	Incoming label for this RSVP session.
Labelout	Outgoing label for this RSVP session.
LSPname	Configured name of the LSP.
Total	Total number of RSVP sessions displayed for the
	particular type—ingress(inbound), egress
	(outbound), or transit).

Monitoring MPLS RSVP Interfaces Information

To view the interfaces on which RSVP is running, select Monitor>MPLS>RSVP

Interfaces, or enter the following CLI command:

show rsvp interface

Table 68 on page 134 summarizes key output fields in the RSVP interfaces information display.

Table 68: Summary of Key RSVP Interfaces Information Output Fields

Field	Values	Additional Information
RSVP Interface	Number of interfaces on which RSVP is active.
	Each interface has one line of output.
Interface	Name of the interface.

134■ Using the Monitoring Tools