J-series™ Services Router Administration Guide

To modify the encryption key:

1.Enter operational mode in the CLI.

2.To configure a new encryption key in EEPROM and determine the encryption process, enter one of the request system set-encryption-keycommands described in Table 103 on page 204. For example:

user@host> request system set-encryption-key

Enter EEPROM stored encryption key:

3.At the prompt, enter the new encryption key. The encryption key must have at least 6 characters.

Enter EEPROM stored encryption key:juniperone

Verifying EEPROM stored encryption key:

4.At the second prompt, reenter the new encryption key.

206Encrypting and Decrypting Configuration Files

Page 228
Image 228
Juniper Networks J-Series manual At the second prompt, reenter the new encryption key