Verifying Autoinstallation | Juniper Networks J-Series specs

J-series™ Services Router Administration Guide

Table 42: Configuring Autoinstallation

Task	J-Web Configuration Editor		CLI Configuration Editor
Navigate to the System level in the	1.	In the J-Web interface, select	From the [edit] hierarchy level, enter
configuration hierarchy.		Configuration>View and Edit>
		Edit Configuration.	edit system
	2.	Next to System, click Configure or
		Edit.

Enable autoinstallation.

Specify the URL address of one or more servers from which to obtain configuration files. For example:

■tftp://tftpconfig.sp.com

■ftp://user:password

@sftpconfig.sp.com

Configure one or more Ethernet or serial interfaces to perform autoinstallation.

Configure one or two procurement protocols for each interface. The router uses the protocols to send a request for an IP address for the interface.

■BOOTP—Sends requests over all interfaces.

■RARP—Sends requests over Ethernet interfaces.

■SLARP—Sends requests over serial interfaces.

Select Autoinstallation, and then click Configure.

1.Next to Configuration servers, click Add new entry.

2.Type the location of the configuration server in the Url box.

3.If a password is required for server access, type it into the Password box.

4.Click OK to return to the Autoinstallation page.

1.Next to Interfaces, click Add new entry.

2.Type the name of the interface into the Interface name box—for example, ge-0/0/0.

3.Click OK.

1.Next to the interface name, click Edit.

2.Select one or two protocols to be used by autoinstallation over the interface—for example, Bootp and Rarp.

3.Click OK.

Enter set autoinstallation configuration-servers url

To set BOOTP and RARP on an Ethernet interface, enter

set autoinstallation interfaces ge-0/0/0 bootp rarp

Verifying Autoinstallation

To verify that a Services Router is configured for autoinstallation, perform the following task.

Verifying Autoinstallation Status

Purpose Display the status of the autoinstallation feature on a Services Router.

86■ Verifying Autoinstallation

Image 108

Juniper Networks J-Series manual Verifying Autoinstallation Status, Configuring Autoinstallation

Contents

Administration Guide North Mathilda Avenue Sunnyvale, California Series Services Router Administration Guide Iii End User License AgreementPage Abbreviated Table of Contents Series Services Router Administration Guide Table of Contents Using the telnet Command Using the ssh Command Modifying USB Modem Initialization CommandsViii Table of Contents Management Information Base Configuring Autoinstallation with a Configuration Editor Verifying Autoinstallation StatusEvent Policy Overview Configuring Event Policies Part Monitoring a Services Router Part Managing Services Router Software Part Diagnosing Performance and Network Problems Xiii Part Index About This Guide ObjectivesAudience Objectives How to Use This Guide Xvi How to Use This GuideLocation of J-series Information Series Tasks Location of Instruction Document Conventions On page xvii defines the notice icons used in this guideText and Syntax Conventions Related Juniper Networks Documentation Web GUI Conventions Series Guides and Related Junos Software Publications Getting Started Guide for Your RouterRelated Juniper Networks Documentation Series Services Router Administration Guide Chapter in a J-series GuideXx Related Juniper Networks Documentation Documentation Feedback Requesting Technical SupportDocumentation Feedback Opening a Case with Jtac Xxii Requesting Technical Support Configuring a Services Router for Administration Configuring a Services Router for AdministrationPage Managing User Authentication and Access User Authentication TermsSystem Management Terms User Authentication Overview User AuthenticationUser Authentication Overview User Accounts Login Classes Predefined Login ClassesPermission Bits Permission Bits for Login Classes Denying or Allowing Individual Commands Template Accounts Managing User Authentication with Quick Configuration Adding a Radius Server for AuthenticationTo configure a Radius server with Quick Configuration Before You Begin Adding a TACACS+ Server for Authentication To configure a TACACS+ server with Quick ConfigurationUsers Quick Configuration for Radius Servers Summary Radius Server Configuring System Authentication To configure system authentication with Quick ConfigurationUsers Quick Configuration for TACACS+ Servers Summary TACACS+ Server To configure users with Quick Configuration Add a User Quick Configuration Page SummaryAdding New Users User Information Managing User Authentication with a Configuration Editor Setting Up Radius AuthenticationManaging User Authentication with a Configuration Editor Setting Up TACACS+ Authentication Setting Up Radius Authentication Setting Up TACACS+ Authentication 172.16.98.24Set tacplus-server address Tacacssecret1 Configuring Authentication Order Configuring Authentication OrderInsert system authentication-order radius After password Controlling User Access Defining Login ClassesDefining Login Classes EditEdit Configuration Operator-and-boot with Operator-and-bootRequest system reboot Creating User Accounts Setting Up Template Accounts ConfigurationViewCreating User Accounts Set user cmartin class superuser Creating a Remote Template Account Creating a Remote Template Account Creating a Local Template Account Creating a Local Template Account Recovering the Root Password Recovering the Root Password Ok boot -s Securing the Console Port Securing the Console Port Accessing Remote Devices with the CLI Using the telnet CommandSecuring the Console Port Using the ssh Command CLI telnet Command OptionsCLI ssh Command Options Configuring Password Retry Limits for Telnet and SSH Access Configuring Password Retry Limits for Telnet and SSH Access Configuring Password Retry Limits for Telnet and SSH Access ConfigurationView and EditEdit ConfigurationEdit system login retry-options Set backoff-thresholdPage Setting Up USB Modems for Remote Management USB Modem TermsUSB Modem Terms USB Modem Overview USB Modem InterfacesUSB Modem Terminology How a Services Router Initializes USB Modems Series Default Modem Initialization CommandsSetting Up USB Modems for Remote Management Modem Command Description S7=45 USB Modem Connection and Configuration Overview USB Modem Connection and Configuration OverviewOn the Services Router At the User End Connecting the USB Modem to the Services Routers USB Port Configuring a USB Modem Interface RequiredTo configure a USB modem interface for the Services Router Configuring a USB Modem Interface ConfigurationView EditEdit ConfigurationEdit interfaces umd0 S0=0 V1 X4 &C1 E0 Q0 &Q8 %C0 Configuring a Dialer Interface Required Adding a Dialer Interface to a Services Router Configuring Dial-In Required Edit unit172.20.10.2 172.20.10.1 Configuring Chap on Dialer Interfaces Optional To configure Chap on the dialer interfaceConfiguring the Dialer Interface for Dial-In Configuring Chap on Dialer Interfaces Ppp-options chap hierarchy level Web Configuration EditorEdit access Edit interfaces dl0 unit Connecting to the Services Router from the User End Configuring a Dial-Up Modem Connection at the User EndConnecting to the Services Router from the User End USB-modem-connect-and then click Next Connecting to the Services Router from the User End Administering USB ModemsAdvanced TCP/IP Settings page appears Administering USB Modems Modifying USB Modem Initialization Commands Modifying USB Modem Initialization Commands Resetting USB Modems Verifying the USB Modem ConfigurationModifying USB Modem Initialization Commands Configure Verifying a USB Modem Interface Verifying a USB Modem Interface Verifying Dialer Interface Configuration Verifying Dialer Interface Configuration Setting Up USB Modems for Remote Management Series Services Router Administration Guide Configuring Snmp for Network Management Snmp ArchitectureSnmp Architecture Management Information Base Snmp Communities Configuring Snmp for Network Management Snmp TrapsSpoofing Snmp Traps Snmp Health Monitor Configuring Snmp with Quick Configuration To configure Snmp features with Quick Configuration Snmp Quick Configuration Summary IdentificationCommunities Traps Health Monitoring Checks the following key indicators Configuring Snmp with a Configuration Editor Configuring Basic System IdentificationDefining System Identification Information Required Configuring Snmp Agents and Communities Required Set descriptionSet name name Select Engine id Configuring Snmp Agents and Communities Managing Snmp Trap Groups Required Controlling Access to MIBs Optional Configuring Snmp Trap GroupsSelect the Authentication , Chassis , Click Categories Verifying the Snmp Configuration Verifying Snmp Agent ConfigurationConfiguring Snmp Views Verifying Snmp Health Monitor Configuration Verifying Snmp Health Monitor Configuration Series Services Router Administration Guide Configuring Snmp for Network Management Page Configuring the Router as a Dhcp Server Dhcp TermsDhcp Terms Dhcp Overview Dhcp Terms Compatibility with Autoinstallation Conflict Detection and ResolutionConfiguring the Router as a Dhcp Server Dhcp Options Configuring the Dhcp Server with Quick Configuration Dhcp Quick Configuration Main Configuring the Dhcp Server with Quick Configuration Dhcp Quick Configuration Pool To configure the Dhcp server with Quick Configuration Dhcp Quick Configuration Static Binding Dhcp Server Quick Configuration Pages Summary Dhcp Pool InformationLease Time Server Information Boot Options Dhcp Static Binding Information Configuring the Dhcp Server with a Configuration Editor Sample Dhcp Server Configuration SettingsSettings Sample Value or Values Dhcp Subnet Configuration Dhcp MAC Address Configuration Configuring the Dhcp Server Entry Verifying a Dhcp Server Configuration Displaying a Dhcp Server ConfigurationIp address Verifying the Dhcp Binding Database Verifying the Dhcp Binding Database Verifying Dhcp Server Operation Verifying Dhcp Server Operation User@host ping Displaying Dhcp Statistics Displaying Dhcp StatisticsPage Configuring Autoinstallation Autoinstallation TermsAutoinstallation Terms Autoinstallation Autoinstallation Overview Supported Autoinstallation Interfaces and ProtocolsHost-specific configuration Typical Autoinstallation Process on a New Services Router Configuring Autoinstallation Before You Begin Configuring Autoinstallation with a Configuration Editor Configuring Autoinstallation with a Configuration Editor Verifying Autoinstallation Verifying Autoinstallation StatusConfiguring Autoinstallation ConfigurationView and Edit Edit Configuration Verifying Autoinstallation Status Page Automating Network Operations and Troubleshooting Commit Script Overview Enabling Commit Scripts Var/db/scripts/commit directory Commit the configuration Disabling Commit ScriptsEnabling Commit Scripts Operation Script Overview Enabling Operation Scripts Executing Operation ScriptsVar/db/scripts/op directory Enabling Operation Scripts Running Self-Diagnostics with Event Policies Running Self-Diagnostics with Event PoliciesDisabling Operation Scripts Configuring Event Policies Event Policy Overview Configuring Event Policies Configuring Destination for Uploading Files for AnalysisConfigure or Edit Configuring Event Policy Edit then execute-commands Set output-filename config.txt output-format textExecute the show interfaces Set then Set raise-trapPage Monitoring a Services Router Monitoring a Services RouterPage Monitoring the Router and Routing Operations Monitoring TermsMonitoring Overview Series Monitoring Terms Monitoring Tools Overview Monitor Option FunctionSystem Chassis Web Monitor Options and Corresponding CLI show Commands RoutingCoS Corresponding CLI Commands Interfaces-show mpls interface Show services nat poolIPSec Rsvp Sessions-show rsvp session Filtering Command Output Show services rpm probe-resultsPPPoE User@host show configuration match address Using the Monitoring Tools Monitoring System PropertiesShow system uptime Show system users Show system storage Summary of Key System Properties Output Fields Set system hostname command Name-server commandSet system time-zone command Users CPU Usage Show system processes commands Monitoring System Process InformationSummary of System Process Information Output Fields System Storage Alarm Summary Monitoring the ChassisSummary of Key Chassis Output Fields Field Values Environment InformationFailed Absent Monitoring the Interfaces FPC Summary Summary of Key Interfaces Output Fields Interface SummaryDown Monitoring Routing Information MTU Monitoring Route Information Show route terse Show route detailSummary of Key Routing Information Output Fields Monitoring BGP Routing Information Show bgp summary Show bgp neighborSummary of Key BGP Routing Output Fields BGP Summary Down to Up BGP Neighbors Monitoring Ospf Routing Information Summary of Key Ospf Routing Output FieldsOspf Neighbors Ospf Interfaces Monitoring RIP Routing Information Show rip statistics Show rip neighborsSummary of Key RIP Routing Output Fields Ospf Statistics Monitoring DLSw Routing Information Summary of Key DLSw Routing Information Output FieldsRIP Neighbors DLSw Capabilities DLSw Circuits DLSw Peers Monitoring Class-of-Service Performance Show class-of-serviceShow class-of-service interface interface Monitoring CoS Interfaces Show class-of-service classifier Monitoring CoS ClassifiersSummary of Key CoS Interfaces Output Fields Summary of Key CoS Classifier Output Fields Show class-of-service code-point-aliases Monitoring CoS Value Aliases Show class-of-service drop-profile Monitoring CoS RED Drop ProfilesSummary of Key CoS Value Alias Output Fields Summary of Key CoS RED Drop Profile Output Fields Show class-of-service forwarding-class Monitoring CoS Forwarding Classes Show class-of-service rewrite-rules Monitoring CoS Rewrite RulesSummary of Key CoS Forwarding Class Output Fields Summary of Key CoS Rewrite Rules Output Fields Show class-of-service scheduler-map Monitoring CoS Scheduler MapsSummary of Key CoS Scheduler Maps Output Fields Monitoring Mpls Traffic Engineering Information Monitoring Mpls Interfaces Monitoring Mpls LSP InformationShow mpls interface Show mpls lsp Monitoring Mpls LSP Statistics Show mpls lsp statisticsTransit Monitoring Rsvp Session Information Show rsvp sessionSummary of Key Rsvp Session Information Output Fields Summary of Key Mpls LSP Statistics Output Fields Monitoring Mpls Rsvp Interfaces Information Show rsvp interfaceSummary of Key Rsvp Interfaces Information Output Fields Monitoring Service Sets Static bandwidth X subscription factor Summary of Key Service Set Output Fields Service Set SummaryMonitoring Firewalls Monitoring Stateful Firewall Statistics Summary of Key Stateful Firewall Statistics Output Fields Monitoring Stateful Firewall Filters Summary of Key Stateful Firewall Filters Output FieldsBytes Monitoring Firewall Intrusion Detection Services IDS IDS Search-Narrowing CharacteristicsNarrow Search Box Entry or Selection Monitoring IPSec Tunnels On page 140 summarizes key output fields in IPSec displaysSummary of Key Firewall IDS Output Fields Summary of Key IPSec Output Fields AH+ESP IPSec StatisticsIKE Security Monitoring NAT Pools Hmac-sha1 Show services nat pool Monitoring DhcpOn page 143 summarizes key output fields in NAT displays Summary of Key NAT Output Fields Dhcp Conflicts Dhcp Statistics Show services rpm probe-results Monitoring RPM ProbesOn page 145 summarizes key output fields in RPM displays Summary of Key RPM Output Fields RTT Round-Trip Time for a Probe Monitoring PPP Cumulative Jitter for a Probe Monitoring PPPoE Summary of Key PPPoE Output FieldsPPPoE Interfaces PPPoE Statistics PPPoE Version Monitoring the TGM550 Media Gateway VoIP Summary of Key Media Gateway Information Output Fields Dynamic Call Admission Control InformationTelephony Gateway Module Information DSP Page Monitoring Events and Managing System Log Files System Log Message TermsSystem Log Message Terms System Log Messages Overview System Log Message Destinations System Log Facilities and Severity LevelsSystem Logging Facilities Regular Expressions System Logging Severity Levels Common Regular Expression Operators and the Terms They Match Regular Expression Operator Matching Terms Configuring System Log Messages with a Configuration Editor Sending System Log Messages to a FileSending System Log Messages to a File Edit system syslog Sending System Log Messages to a User Terminal Archiving System LogsSending Messages to a User Terminal Set user frank any critical Disabling System Logs Monitoring System Log Messages with the J-Web Event ViewerFiltering System Log Messages Filtering System Log Messages CLI command-show system processes Installation and Upgrade Guide Viewing System Log Messages Viewing System Log Messages Configuring and Monitoring Alarms Alarm Terms Alarm Overview Alarm TypesAlarm Terms Interface alarm Alarm Severity Alarm ConditionsInterface Alarm Conditions Configuring and Monitoring Alarms Interface Alarm Conditions Pic-hold-reset Pic-resetHw-down Linkdown Chassis Alarm Conditions and Corrective Actions Chassis Alarm Conditions and Corrective Actions Component Alarm ConditionsCorrective Action Alarm Severity Configuring Alarms with a Configuration Editor System Alarm Conditions and Corrective ActionsSystem Alarm Conditions and Corrective Actions Alarm Type Alarm Condition Corrective Action Configuring Interface Alarms Checking Active Alarms Show chassis alarms Show system alarmsOn page 174 summarizes the output fields on the alarms Summary of Key Alarm Output Fields Verifying the Alarms Configuration Displaying Alarm ConfigurationsTo verify alarms configuration, perform the following task Edit User@host# show chassis alarms t3 Displaying Alarm Configurations Managing Services Router Software Managing Services Router SoftwarePage Performing Software Upgrades and Reboots Upgrade and Downgrade OverviewUpgrade and Downgrade Overview Upgrade Software Packages Recovery Software Packages Downloading Software Upgrades from Juniper Networks Secondary Storage Devices for BackupPerforming Software Upgrades and Reboots Installing Software Upgrades with the J-Web Interface Installing Software Upgrades from a Remote ServerInstalling Software Upgrades with the J-Web Interface Installing Software Upgrades by Uploading Files Install Remote SummaryUpload Package Summary Installing Software Upgrades with the CLI Installing Software Upgrades with the CLIUser@host request system software add unlink no-copy source Var/tmp/junos-j-series8.5R2.1.tar.gz Downgrading the Software Downgrading the Software with the J-Web InterfaceDowngrading the Software with the CLI Downgrading the Software Configuring Boot Devices User@host request system rebootConfiguring Boot Devices User@host request system software rollback Click OK Snapshot Summary Partitions the boot medium Configuring a Boot Device for Backup with the CLI CLI request system snapshot Command Options Option Description Partition Root-size sizeSwap-size size Recovering Primary Boot Devices Why Compact Flash Recovery Might Be NecessaryCLI set system dump-device Command Options Recommended Recovery Hardware and Software Configuring Internal Compact Flash RecoveryRecommended Recovery Hardware and Software Recovery Hardware \ physdiskwrite -u junos-jseries-7.0-20041028.0-export-cf512 Rebooting or Halting a Services Router Rebooting or Halting a Services Router Rebooting a Services Router with the CLI CLI Request System Reboot Command OptionsOption Description Halting a Services Router with the CLI CLI Request System Halt Command Options This option is a synonym for the at + minutes option Page Cleaning Up Files Managing FilesManaging Files with the J-Web Interface Downloading Files Managing Files with the J-Web Interface Deleting the Backup Software Image Cleaning Up Files with the CLIDeleting the Backup Software Image Managing Files Managing Accounting Files Managing Accounting Files Encrypting and Decrypting Configuration Files Encrypting and Decrypting Configuration FilesGz.jc-for example, juniper.conf.gz.jc Encrypting Configuration Files Request system set-encryption-key CommandsCLI Command Description For example Decrypting Configuration Files To begin the encryption process, commit the configurationTo begin the decryption process, commit the configuration Modifying the Encryption Key At the second prompt, reenter the new encryption key Diagnosing Performance and Network Problems Diagnosing Performance and Network ProblemsPage Using Services Router Diagnostic Tools Diagnostic TermsSeries Diagnostic Terms Diagnostic Tools Overview Web Diagnostic Tools OverviewWeb Interface Diagnose and Manage Options CLI Diagnostic Commands Overview Manage Options CLI Diagnostic Command Summary Diagnosis and Troubleshooting Command Function Start Mpls Connection CheckingOptions for Checking Mpls Connections Quit Locate LSP using Ping LSP to Layer Ping mpls l3vpnVPN prefix Interface name Instance to which this Mpls Enabled General PreparationPing Mpls Preparation Loopback Address Using the J-Web Ping Host Tool Pinging Hosts from the J-Web InterfaceWeb Ping Host Field Summary Pinging Hosts from the J-Web Interface Ping Host Results Ping Host Results and Output Summary Web Ping Host Results and Output SummaryPing Host Result Icmpseq=0 Icmpseq=number Using the J-Web Ping Mpls Tool Checking Mpls Connections from the J-Web InterfaceChecking Mpls Connections from the J-Web Interface Ping LDP-signaled LSP Locate LSP using interface nameWeb Ping Mpls Field Summary Ping LSP to Layer 3 VPN prefix Instance to which this connection belongs Locate LSP from interface nameLocate LSP from virtual circuit information Ping end point of LSP Ping Mpls Results and Output Web Ping Mpls Results and Output SummaryField Description Time Using the J-Web Traceroute Tool Tracing Unicast Routes from the J-Web InterfaceTo use the traceroute tool Tracing Unicast Routes from the J-Web Interface Traceroute Traceroute Field Summary Traceroute Results and Output Summary Web Traceroute Results and Output Summary Using J-Web Packet Capture Capturing and Viewing Packets with the J-Web InterfaceTo use J-Web packet capture Capturing and Viewing Packets with the J-Web Interface Packet Capture Field Summary Ge-0/0/0Advanced Options Addresses Into hostnames in the packet headers displayed Packet Capture Results and Output Summary Web Packet Capture Results and Output Summary Using CLI Diagnostic Commands To quit the ping command, press Ctrl-CCLI ping Command Options Pinging Hosts from the CLI Do-not-fragment Following is sample output from a ping command Checking Mpls Connections from the CLI Pinging RSVP-Signaled LSPs and LDP-Signaled LSPs Following is sample output from a ping mpls command Following is sample output from a ping mpls l3vpn command CLI ping mpls l3vpn Command OptionsPinging Layer 3 VPNs Following is sample output from a ping mpls l2vpn command CLI ping mpls l2vpn Command OptionsPinging Layer 2 VPNs CLI ping mpls l2circuit Command Options Pinging Layer 2 Circuits Using the traceroute Command To quit the traceroute command, press Ctrl-CCLI traceroute Command Options Tracing Unicast Routes from the CLI Using the traceroute monitor Command Following is sample output from a traceroute commandGateway address Inet6 To quit the traceroute monitor command, press Q CLI traceroute monitor Command OptionsOn page 240 summarizes the output fields of the display CLI traceroute monitor Command Output Summary Tracing Multicast Routes from the CLI Using the mtrace from-source Command CLI mtrace from-source Command Options On page 243 summarizes the output fields of the display Using the mtrace monitor Command CLI mtrace from-source Command Output Summary CLI mtrace monitor Command Output Summary Displaying Log and Trace Files from the CLI Using the monitor interface Command Monitoring Interfaces and Traffic from the CLICLI monitor interface Output Control Keys CLI monitor interface traffic Output Control Keys Using the monitor traffic Command User@host monitor interface fe-0/0/0 CLI monitor traffic Command Options CLI monitor traffic Match Conditions Option Description BriefExtensive Match Condition Description Directional CLI monitor traffic Logical Operators Arithmetic OperatorBinary Operator Relational Operator Following is sample output from the monitor traffic command Page Configuring Packet Capture Packet Capture TermsPacket Capture Terms Packet Capture Overview Packet Capture Terms Configuring Packet Capture Packet Capture on Router InterfacesFirewall Filters for Packet Capture Packet Capture Files Analysis of Packet Capture Files Configuring Packet Capture with a Configuration Editor Enabling Packet Capture Required Enabling Packet Capture Navigate to the Forwarding options Configuring Packet Capture on an Interface Required Configuring a Firewall Filter for Packet Capture OptionalConfiguring Packet Capture on an Interface 259 Configuring a Firewall Filter for Packet Capture Edit firewall192.168.1.1/32 Enter set packet-capture disable Disabling Packet CaptureDeleting Packet Capture Files 261 Return to the CLI operational mode User@host start shellCd /var/tmp Rm pcap-file.fe.0.0.0 Displaying a Packet Capture Configuration Verifying Packet CaptureMv pcap-file.fe.0.0.0 pcap-file.fe.0.0.0.chdsl Verifying Packet Capture Verifying Captured Packets Return to the CLI configuration mode Ftp lcd /var/tmp Local directory now /cf/var/tmpFtp bye Goodbye Edit User@host# Verifying Captured Packets Meaning Verify that the output shows the intended packets Configuring RPM Probes RPM Terms RPM Overview RPM ProbesRPM target RPM test Configuring RPM Probes RPM TestsProbe and Test Intervals Jitter Measurement with Hardware Timestamping RPM Statistics RPM StatisticsRound-Trip Times Inbound and Outbound Times Icmp Timestamp Probes Only Configuring RPM with Quick Configuration RPM Thresholds and TrapsRPM for BGP Monitoring RPM Quick Configuration Summary Configuring RPM with Quick ConfigurationPerformance Probe Owners Router Advanced WAN Access Configuration Guide Maximum Probe Thresholds Generates Snmp traps when the threshold for standard Configuring RPM with a Configuration Editor Configuring Basic RPM ProbesConfiguring RPM with a Configuration Editor Performance Probe Server Configuring Basic RPM Probes Edit services rpmClick Configure Set probe customerA Edit services rpm probe customerA 192.178.16.5Set test icmp-test probe-frequency Set test icmp-test probe-type icmp-ping-timestamp Configuring TCP and UDP Probes Configuring TCP and UDP Probes Router a Configuration Router B Configuration Tuning RPM Probes Tuning RPM ProbesCustomerA Set probe-limit Configuring RPM Probes to Monitor BGP Neighbors Configuring RPM Probes for BGP Monitoring Configuring RPM Probes to Monitor BGP Neighbors Verifying an RPM Configuration Directing RPM Probes to Select BGP RoutersDirecting RPM Probes to Select BGP Routers Add new entry Verifying RPM Services Verifying RPM ServicesVerifying RPM Statistics Verifying RPM Statistics Verifying RPM Probe Servers Verifying RPM Probe Servers Index Index onIndex Series Services Router Administration Guide Index Symbols 112 Chassis Dd utility, for compact flash recovery 192 Snmp health monitor System logs Dhcp Snmp Junos Internet software Diagnosing problems from 210 Monitoring from 102 See also Snmp Permissions Radius CLI See also RPM probes Preparation Serial number Chassis components BGP TACACS+ Routing Engine, too warm Upgrades Version Hardware, displaying