Juniper Networks J-Series Monitoring RIP Routing Information, Ospf Statistics, RIP Statistics

J-series™ Services Router Administration Guide

Table 54: Summary of Key OSPF Routing Output Fields (continued)

Field	Values	Additional Information
Area	Number of the area that the interface is in.
DR ID	Address of the area's designated router.
BDR ID	Address of the area's backup designated router.
Nbrs	Number of neighbors on this interface.
OSPF Statistics
Packet	Type of OSPF packet.
Type
Total	Total number of packets sent and received.
Sent/Total
Received
Last 5	Total number of packets sent and received in the last
seconds	5 seconds.
Sent/Last 5
seconds
Received
Receive	Number and type of receive errors.
errors

Monitoring RIP Routing Information

To view RIP routing information, select Monitor>Routing>RIP Information, or enter the following CLI commands:

■show rip statistics

■show rip neighbors

Table 55 on page 120 summarizes key output fields in the RIP routing display.

Table 55: Summary of Key RIP Routing Output Fields

Field	Values	Additional Information
RIP Statistics
Rip info	Information about RIP on the specified interface,
	including UDP port number, hold-down interval (during
	which routes are neither advertised nor updated), and
	timeout interval.
Logical	Name of the logical interface on which RIP is
interface	configured.
Routes	Number of RIP routes learned on the logical interface.
learned

120■ Using the Monitoring Tools