Manuals / Juniper Networks / Computer Equipment / Network Router

Juniper Networks J-Series manual Router B Configuration

Models: J-Series

1 332

Download 332 pages 610 b

Page 303

Chapter 14: Configuring RPM Probes

Table 142: Configuring TCP and UDP Probes (continued)

Task

Configure the RPM test tcp-testfor the RPM owner customerC.

The sample RPM test is a TCP probe with a test interval (probe frequency) of 5, a probe type of tcp-ping, and a target address of 192.162.45.6.

Configure the destination interface.

NOTE: On Services Routers the destination interface must be an lt services interface.

J-Web Configuration Editor

1.On the Rpm page, select customerC.

2.In the Test box, click Add new entry.

3.In the Name box, type tcp-test.

4.In the Test interval box, type 5.

5.In the Probe type box, select tcp-ping.

6.In the Target box, select the Yes check box, and click Configure.

7.In the Target type box, select Address.

8.In the Address box, type

192.162.45.6.

9.Click OK.

In the Destination interface box, type

lt-0/0/0

CLI Configuration Editor

1.From the [edit] hierarchy level, enter

edit services rpm probe customerC

2.Enter

set test tcp-test probe-frequency 5

3.Enter

set test tcp-test probe-type tcp-ping

4.Enter

set test tcp-test target address 192.162.45.6

Enter

set test tcp-test destination-interface lt-0/0/0

Configure port 50000 as the TCP port to	In the Destination port box, type 50000.
which the RPM probes are sent.
Router B Configuration
Navigate to the Services>RPM level in	1.	In the J-Web interface, select
the configuration hierarchy.		Configuration>View and
		Edit>Edit Configuration.
	2.	Next to Services, click Configure
		or Edit.
	3.	Next to Rpm, select the Yes check
		box.
	4.	Click Configure.
Configure Router B to act as a TCP	1.	Next to Probe server, click
server, using port 50000 to send and		Configure.
receive TCP probes.	2.	In the Tcp box, click Configure.
	2.	In the Tcp box, click Configure.
	3.	In the Port box, type 50000.
	4.	Click OK.

Enter

set test tcp-test destination-port 50000

From the [edit] hierarchy level, enter

edit services rpm

Enter

set probe-server tcp port 50000

Configuring RPM with a Configuration Editor ■ 281

Image 303

Juniper Networks J-Series manual Router B Configuration

Contents

North Mathilda Avenue Sunnyvale, California Administration GuideSeries Services Router Administration Guide End User License Agreement IiiPage Abbreviated Table of Contents Series Services Router Administration Guide Table of Contents Management Information Base Using the telnet Command Using the ssh CommandModifying USB Modem Initialization Commands Viii Table of ContentsConfiguring Autoinstallation with a Configuration Editor Verifying Autoinstallation StatusEvent Policy Overview Configuring Event Policies Part Monitoring a Services Router Part Managing Services Router Software Part Diagnosing Performance and Network Problems Xiii Part Index Objectives About This GuideObjectives AudienceSeries Tasks Location of Instruction How to Use This GuideXvi How to Use This Guide Location of J-series InformationDocument Conventions On page xvii defines the notice icons used in this guideText and Syntax Conventions Web GUI Conventions Related Juniper Networks DocumentationSeries Guides and Related Junos Software Publications Getting Started Guide for Your RouterRelated Juniper Networks Documentation Series Services Router Administration Guide Chapter in a J-series GuideXx Related Juniper Networks Documentation Documentation Feedback Requesting Technical SupportDocumentation Feedback Xxii Requesting Technical Support Opening a Case with JtacConfiguring a Services Router for Administration Configuring a Services Router for AdministrationPage Managing User Authentication and Access User Authentication TermsSystem Management Terms User Accounts User Authentication OverviewUser Authentication User Authentication OverviewLogin Classes Predefined Login ClassesPermission Bits Permission Bits for Login Classes Template Accounts Denying or Allowing Individual CommandsBefore You Begin Managing User Authentication with Quick ConfigurationAdding a Radius Server for Authentication To configure a Radius server with Quick ConfigurationRadius Server Adding a TACACS+ Server for AuthenticationTo configure a TACACS+ server with Quick Configuration Users Quick Configuration for Radius Servers SummaryTACACS+ Server Configuring System AuthenticationTo configure system authentication with Quick Configuration Users Quick Configuration for TACACS+ Servers SummaryUser Information To configure users with Quick ConfigurationAdd a User Quick Configuration Page Summary Adding New UsersManaging User Authentication with a Configuration Editor Setting Up Radius AuthenticationManaging User Authentication with a Configuration Editor Setting Up Radius Authentication Setting Up TACACS+ AuthenticationTacacssecret1 Setting Up TACACS+ Authentication172.16.98.24 Set tacplus-server addressAfter password Configuring Authentication OrderConfiguring Authentication Order Insert system authentication-order radiusEditEdit Configuration Controlling User AccessDefining Login Classes Defining Login ClassesCreating User Accounts Operator-and-boot withOperator-and-boot Request system rebootSet user cmartin class superuser Setting Up Template AccountsConfigurationView Creating User AccountsCreating a Remote Template Account Creating a Remote Template AccountCreating a Local Template Account Creating a Local Template AccountRecovering the Root Password Recovering the Root PasswordOk boot -s Securing the Console Port Securing the Console PortAccessing Remote Devices with the CLI Using the telnet CommandSecuring the Console Port Using the ssh Command CLI telnet Command OptionsCLI ssh Command Options Configuring Password Retry Limits for Telnet and SSH Access Configuring Password Retry Limits for Telnet and SSH AccessSet backoff-threshold Configuring Password Retry Limits for Telnet and SSH AccessConfigurationView and EditEdit Configuration Edit system login retry-optionsPage Setting Up USB Modems for Remote Management USB Modem TermsUSB Modem Terms USB Modem Overview USB Modem InterfacesUSB Modem Terminology Modem Command Description S7=45 How a Services Router Initializes USB ModemsSeries Default Modem Initialization Commands Setting Up USB Modems for Remote ManagementAt the User End USB Modem Connection and Configuration OverviewUSB Modem Connection and Configuration Overview On the Services RouterConnecting the USB Modem to the Services Routers USB Port Configuring a USB Modem Interface RequiredTo configure a USB modem interface for the Services Router S0=0 V1 X4 &C1 E0 Q0 &Q8 %C0 Configuring a USB Modem InterfaceConfigurationView EditEdit Configuration Edit interfaces umd0Adding a Dialer Interface to a Services Router Configuring a Dialer Interface Required172.20.10.1 Configuring Dial-In RequiredEdit unit 172.20.10.2Configuring Chap on Dialer Interfaces Optional To configure Chap on the dialer interfaceConfiguring the Dialer Interface for Dial-In Edit interfaces dl0 unit Configuring Chap on Dialer InterfacesPpp-options chap hierarchy level Web Configuration Editor Edit accessUSB-modem-connect-and then click Next Connecting to the Services Router from the User EndConfiguring a Dial-Up Modem Connection at the User End Connecting to the Services Router from the User EndAdministering USB Modems Connecting to the Services Router from the User EndAdministering USB Modems Advanced TCP/IP Settings page appearsModifying USB Modem Initialization Commands Modifying USB Modem Initialization CommandsConfigure Resetting USB ModemsVerifying the USB Modem Configuration Modifying USB Modem Initialization CommandsVerifying a USB Modem Interface Verifying a USB Modem InterfaceVerifying Dialer Interface Configuration Verifying Dialer Interface ConfigurationSetting Up USB Modems for Remote Management Series Services Router Administration Guide Configuring Snmp for Network Management Snmp ArchitectureSnmp Architecture Snmp Communities Management Information BaseSnmp Health Monitor Configuring Snmp for Network ManagementSnmp Traps Spoofing Snmp TrapsTo configure Snmp features with Quick Configuration Configuring Snmp with Quick ConfigurationTraps Snmp Quick Configuration SummaryIdentification CommunitiesHealth Monitoring Checks the following key indicators Configuring Snmp with a Configuration Editor Configuring Basic System IdentificationDefining System Identification Information Required Select Engine id Configuring Snmp Agents and Communities RequiredSet description Set name nameManaging Snmp Trap Groups Required Configuring Snmp Agents and CommunitiesClick Categories Controlling Access to MIBs OptionalConfiguring Snmp Trap Groups Select the Authentication , Chassis ,Verifying the Snmp Configuration Verifying Snmp Agent ConfigurationConfiguring Snmp Views Verifying Snmp Health Monitor Configuration Verifying Snmp Health Monitor ConfigurationSeries Services Router Administration Guide Configuring Snmp for Network Management Page Configuring the Router as a Dhcp Server Dhcp TermsDhcp Terms Dhcp Terms Dhcp OverviewDhcp Options Compatibility with AutoinstallationConflict Detection and Resolution Configuring the Router as a Dhcp ServerConfiguring the Dhcp Server with Quick Configuration Configuring the Dhcp Server with Quick Configuration Dhcp Quick Configuration MainDhcp Quick Configuration Pool Dhcp Quick Configuration Static Binding To configure the Dhcp server with Quick ConfigurationServer Information Dhcp Server Quick Configuration Pages SummaryDhcp Pool Information Lease TimeDhcp Static Binding Information Boot OptionsDhcp Subnet Configuration Configuring the Dhcp Server with a Configuration EditorSample Dhcp Server Configuration Settings Settings Sample Value or ValuesDhcp MAC Address Configuration Entry Configuring the Dhcp ServerVerifying a Dhcp Server Configuration Displaying a Dhcp Server ConfigurationIp address Verifying the Dhcp Binding Database Verifying the Dhcp Binding DatabaseVerifying Dhcp Server Operation Verifying Dhcp Server OperationUser@host ping Displaying Dhcp Statistics Displaying Dhcp StatisticsPage Autoinstallation Configuring AutoinstallationAutoinstallation Terms Autoinstallation TermsAutoinstallation Overview Supported Autoinstallation Interfaces and ProtocolsHost-specific configuration Configuring Autoinstallation Typical Autoinstallation Process on a New Services RouterBefore You Begin Configuring Autoinstallation with a Configuration Editor Configuring Autoinstallation with a Configuration EditorConfigurationView and Edit Edit Configuration Verifying AutoinstallationVerifying Autoinstallation Status Configuring AutoinstallationVerifying Autoinstallation Status Page Commit Script Overview Automating Network Operations and TroubleshootingVar/db/scripts/commit directory Enabling Commit ScriptsCommit the configuration Disabling Commit ScriptsEnabling Commit Scripts Operation Script Overview Enabling Operation Scripts Enabling Operation ScriptsExecuting Operation Scripts Var/db/scripts/op directoryRunning Self-Diagnostics with Event Policies Running Self-Diagnostics with Event PoliciesDisabling Operation Scripts Event Policy Overview Configuring Event PoliciesConfiguring Event Policy Configuring Event PoliciesConfiguring Destination for Uploading Files for Analysis Configure or EditSet then Set raise-trap Edit then execute-commandsSet output-filename config.txt output-format text Execute the show interfacesPage Monitoring a Services Router Monitoring a Services RouterPage Series Monitoring Terms Monitoring the Router and Routing OperationsMonitoring Terms Monitoring OverviewChassis Monitoring Tools OverviewMonitor Option Function SystemWeb Monitor Options and Corresponding CLI show Commands RoutingCoS Rsvp Sessions-show rsvp session Corresponding CLI Commands Interfaces-show mpls interfaceShow services nat pool IPSecFiltering Command Output Show services rpm probe-resultsPPPoE User@host show configuration match address Summary of Key System Properties Output Fields Using the Monitoring ToolsMonitoring System Properties Show system uptime Show system users Show system storageUsers Set system hostname commandName-server command Set system time-zone commandCPU Usage System Storage Show system processes commandsMonitoring System Process Information Summary of System Process Information Output FieldsAlarm Summary Monitoring the ChassisSummary of Key Chassis Output Fields Absent Field ValuesEnvironment Information FailedFPC Summary Monitoring the InterfacesSummary of Key Interfaces Output Fields Interface SummaryDown MTU Monitoring Routing InformationMonitoring Route Information Show route terse Show route detailSummary of Key Routing Information Output Fields BGP Summary Monitoring BGP Routing InformationShow bgp summary Show bgp neighbor Summary of Key BGP Routing Output FieldsBGP Neighbors Down to UpOspf Interfaces Monitoring Ospf Routing InformationSummary of Key Ospf Routing Output Fields Ospf NeighborsOspf Statistics Monitoring RIP Routing InformationShow rip statistics Show rip neighbors Summary of Key RIP Routing Output FieldsDLSw Capabilities Monitoring DLSw Routing InformationSummary of Key DLSw Routing Information Output Fields RIP NeighborsDLSw Peers DLSw CircuitsMonitoring CoS Interfaces Monitoring Class-of-Service PerformanceShow class-of-service Show class-of-service interface interfaceSummary of Key CoS Classifier Output Fields Show class-of-service classifierMonitoring CoS Classifiers Summary of Key CoS Interfaces Output FieldsMonitoring CoS Value Aliases Show class-of-service code-point-aliasesSummary of Key CoS RED Drop Profile Output Fields Show class-of-service drop-profileMonitoring CoS RED Drop Profiles Summary of Key CoS Value Alias Output FieldsMonitoring CoS Forwarding Classes Show class-of-service forwarding-classSummary of Key CoS Rewrite Rules Output Fields Show class-of-service rewrite-rulesMonitoring CoS Rewrite Rules Summary of Key CoS Forwarding Class Output FieldsShow class-of-service scheduler-map Monitoring CoS Scheduler MapsSummary of Key CoS Scheduler Maps Output Fields Monitoring Mpls Traffic Engineering Information Show mpls lsp Monitoring Mpls InterfacesMonitoring Mpls LSP Information Show mpls interfaceMonitoring Mpls LSP Statistics Show mpls lsp statisticsTransit Summary of Key Mpls LSP Statistics Output Fields Monitoring Rsvp Session InformationShow rsvp session Summary of Key Rsvp Session Information Output FieldsMonitoring Mpls Rsvp Interfaces Information Show rsvp interfaceSummary of Key Rsvp Interfaces Information Output Fields Static bandwidth X subscription factor Monitoring Service SetsSummary of Key Service Set Output Fields Service Set SummaryMonitoring Firewalls Summary of Key Stateful Firewall Statistics Output Fields Monitoring Stateful Firewall StatisticsMonitoring Stateful Firewall Filters Summary of Key Stateful Firewall Filters Output FieldsBytes Monitoring Firewall Intrusion Detection Services IDS IDS Search-Narrowing CharacteristicsNarrow Search Box Entry or Selection Summary of Key IPSec Output Fields Monitoring IPSec TunnelsOn page 140 summarizes key output fields in IPSec displays Summary of Key Firewall IDS Output FieldsAH+ESP IPSec StatisticsIKE Security Hmac-sha1 Monitoring NAT PoolsSummary of Key NAT Output Fields Show services nat poolMonitoring Dhcp On page 143 summarizes key output fields in NAT displaysDhcp Statistics Dhcp ConflictsSummary of Key RPM Output Fields Show services rpm probe-resultsMonitoring RPM Probes On page 145 summarizes key output fields in RPM displaysRound-Trip Time for a Probe RTTCumulative Jitter for a Probe Monitoring PPPMonitoring PPPoE Summary of Key PPPoE Output FieldsPPPoE Interfaces PPPoE Statistics PPPoE Version Monitoring the TGM550 Media Gateway VoIP Summary of Key Media Gateway Information Output Fields Dynamic Call Admission Control InformationTelephony Gateway Module Information DSP Page Monitoring Events and Managing System Log Files System Log Message TermsSystem Log Message Terms System Log Messages Overview System Log Message Destinations System Log Facilities and Severity LevelsSystem Logging Facilities System Logging Severity Levels Regular ExpressionsRegular Expression Operator Matching Terms Common Regular Expression Operators and the Terms They MatchEdit system syslog Configuring System Log Messages with a Configuration EditorSending System Log Messages to a File Sending System Log Messages to a FileSet user frank any critical Sending System Log Messages to a User TerminalArchiving System Logs Sending Messages to a User TerminalFiltering System Log Messages Disabling System LogsMonitoring System Log Messages with the J-Web Event Viewer Filtering System Log MessagesInstallation and Upgrade Guide CLI command-show system processesViewing System Log Messages Viewing System Log MessagesAlarm Terms Configuring and Monitoring AlarmsInterface alarm Alarm OverviewAlarm Types Alarm TermsConfiguring and Monitoring Alarms Alarm SeverityAlarm Conditions Interface Alarm ConditionsInterface Alarm Conditions Linkdown Pic-hold-resetPic-reset Hw-downChassis Alarm Conditions and Corrective Actions Chassis Alarm Conditions and Corrective Actions Component Alarm ConditionsCorrective Action Alarm Severity Alarm Type Alarm Condition Corrective Action Configuring Alarms with a Configuration EditorSystem Alarm Conditions and Corrective Actions System Alarm Conditions and Corrective ActionsConfiguring Interface Alarms Summary of Key Alarm Output Fields Checking Active AlarmsShow chassis alarms Show system alarms On page 174 summarizes the output fields on the alarmsEdit User@host# show chassis alarms t3 Verifying the Alarms ConfigurationDisplaying Alarm Configurations To verify alarms configuration, perform the following taskDisplaying Alarm Configurations Managing Services Router Software Managing Services Router SoftwarePage Performing Software Upgrades and Reboots Upgrade and Downgrade OverviewUpgrade and Downgrade Overview Recovery Software Packages Upgrade Software PackagesDownloading Software Upgrades from Juniper Networks Secondary Storage Devices for BackupPerforming Software Upgrades and Reboots Installing Software Upgrades with the J-Web Interface Installing Software Upgrades from a Remote ServerInstalling Software Upgrades with the J-Web Interface Installing Software Upgrades by Uploading Files Install Remote SummaryUpload Package Summary Var/tmp/junos-j-series8.5R2.1.tar.gz Installing Software Upgrades with the CLIInstalling Software Upgrades with the CLI User@host request system software add unlink no-copy sourceDowngrading the Software Downgrading the SoftwareDowngrading the Software with the J-Web Interface Downgrading the Software with the CLIUser@host request system software rollback Configuring Boot DevicesUser@host request system reboot Configuring Boot DevicesSnapshot Summary Click OKPartitions the boot medium CLI request system snapshot Command Options Configuring a Boot Device for Backup with the CLIOption Description Partition Root-size sizeSwap-size size Recovering Primary Boot Devices Why Compact Flash Recovery Might Be NecessaryCLI set system dump-device Command Options Recovery Hardware Recommended Recovery Hardware and SoftwareConfiguring Internal Compact Flash Recovery Recommended Recovery Hardware and Software\ physdiskwrite -u junos-jseries-7.0-20041028.0-export-cf512 Rebooting or Halting a Services Router Rebooting or Halting a Services RouterRebooting a Services Router with the CLI CLI Request System Reboot Command OptionsOption Description CLI Request System Halt Command Options Halting a Services Router with the CLIThis option is a synonym for the at + minutes option Page Cleaning Up Files Managing FilesManaging Files with the J-Web Interface Managing Files with the J-Web Interface Downloading FilesManaging Files Deleting the Backup Software ImageCleaning Up Files with the CLI Deleting the Backup Software ImageManaging Accounting Files Managing Accounting FilesEncrypting and Decrypting Configuration Files Encrypting and Decrypting Configuration FilesGz.jc-for example, juniper.conf.gz.jc For example Encrypting Configuration FilesRequest system set-encryption-key Commands CLI Command DescriptionModifying the Encryption Key Decrypting Configuration FilesTo begin the encryption process, commit the configuration To begin the decryption process, commit the configurationAt the second prompt, reenter the new encryption key Diagnosing Performance and Network Problems Diagnosing Performance and Network ProblemsPage Using Services Router Diagnostic Tools Diagnostic TermsSeries Diagnostic Terms Diagnostic Tools Overview Web Diagnostic Tools OverviewWeb Interface Diagnose and Manage Options Manage Options CLI Diagnostic Commands OverviewDiagnosis and Troubleshooting CLI Diagnostic Command SummaryQuit Command Function StartMpls Connection Checking Options for Checking Mpls ConnectionsInterface name Instance to which this Locate LSP usingPing LSP to Layer Ping mpls l3vpn VPN prefixLoopback Address Mpls EnabledGeneral Preparation Ping Mpls PreparationPinging Hosts from the J-Web Interface Using the J-Web Ping Host ToolPinging Hosts from the J-Web Interface Web Ping Host Field SummaryPing Host Results Icmpseq=0 Icmpseq=number Ping Host Results and Output SummaryWeb Ping Host Results and Output Summary Ping Host ResultUsing the J-Web Ping Mpls Tool Checking Mpls Connections from the J-Web InterfaceChecking Mpls Connections from the J-Web Interface Ping LSP to Layer 3 VPN prefix Ping LDP-signaled LSPLocate LSP using interface name Web Ping Mpls Field SummaryPing end point of LSP Instance to which this connection belongsLocate LSP from interface name Locate LSP from virtual circuit informationTime Ping Mpls Results and OutputWeb Ping Mpls Results and Output Summary Field DescriptionTracing Unicast Routes from the J-Web Interface Using the J-Web Traceroute ToolTracing Unicast Routes from the J-Web Interface To use the traceroute toolTraceroute Field Summary TracerouteWeb Traceroute Results and Output Summary Traceroute Results and Output SummaryCapturing and Viewing Packets with the J-Web Interface Using J-Web Packet CaptureCapturing and Viewing Packets with the J-Web Interface To use J-Web packet capturePacket Capture Field Summary Ge-0/0/0Advanced Options Addresses Into hostnames in the packet headers displayed Web Packet Capture Results and Output Summary Packet Capture Results and Output SummaryPinging Hosts from the CLI Using CLI Diagnostic CommandsTo quit the ping command, press Ctrl-C CLI ping Command OptionsDo-not-fragment Checking Mpls Connections from the CLI Following is sample output from a ping commandFollowing is sample output from a ping mpls command Pinging RSVP-Signaled LSPs and LDP-Signaled LSPsFollowing is sample output from a ping mpls l3vpn command CLI ping mpls l3vpn Command OptionsPinging Layer 3 VPNs Following is sample output from a ping mpls l2vpn command CLI ping mpls l2vpn Command OptionsPinging Layer 2 VPNs Pinging Layer 2 Circuits CLI ping mpls l2circuit Command OptionsTracing Unicast Routes from the CLI Using the traceroute CommandTo quit the traceroute command, press Ctrl-C CLI traceroute Command OptionsInet6 Using the traceroute monitor CommandFollowing is sample output from a traceroute command Gateway addressTo quit the traceroute monitor command, press Q CLI traceroute monitor Command OptionsOn page 240 summarizes the output fields of the display Tracing Multicast Routes from the CLI CLI traceroute monitor Command Output SummaryUsing the mtrace from-source Command On page 243 summarizes the output fields of the display CLI mtrace from-source Command OptionsCLI mtrace from-source Command Output Summary Using the mtrace monitor CommandDisplaying Log and Trace Files from the CLI CLI mtrace monitor Command Output SummaryCLI monitor interface traffic Output Control Keys Using the monitor interface CommandMonitoring Interfaces and Traffic from the CLI CLI monitor interface Output Control KeysUser@host monitor interface fe-0/0/0 Using the monitor traffic CommandCLI monitor traffic Command Options Match Condition Description CLI monitor traffic Match ConditionsOption Description Brief ExtensiveDirectional Relational Operator CLI monitor traffic Logical OperatorsArithmetic Operator Binary OperatorFollowing is sample output from the monitor traffic command Page Configuring Packet Capture Packet Capture TermsPacket Capture Terms Packet Capture Terms Packet Capture OverviewConfiguring Packet Capture Packet Capture on Router InterfacesFirewall Filters for Packet Capture Analysis of Packet Capture Files Packet Capture FilesEnabling Packet Capture Required Configuring Packet Capture with a Configuration EditorNavigate to the Forwarding options Enabling Packet Capture259 Configuring Packet Capture on an Interface RequiredConfiguring a Firewall Filter for Packet Capture Optional Configuring Packet Capture on an InterfaceConfiguring a Firewall Filter for Packet Capture Edit firewall192.168.1.1/32 261 Enter set packet-capture disableDisabling Packet Capture Deleting Packet Capture FilesRm pcap-file.fe.0.0.0 Return to the CLI operational modeUser@host start shell Cd /var/tmpVerifying Packet Capture Displaying a Packet Capture ConfigurationVerifying Packet Capture Mv pcap-file.fe.0.0.0 pcap-file.fe.0.0.0.chdslVerifying Captured Packets Verifying Captured Packets Return to the CLI configuration modeFtp lcd /var/tmp Local directory now /cf/var/tmp Ftp bye Goodbye Edit User@host#Meaning Verify that the output shows the intended packets RPM Terms Configuring RPM ProbesRPM test RPM OverviewRPM Probes RPM targetJitter Measurement with Hardware Timestamping Configuring RPM ProbesRPM Tests Probe and Test IntervalsInbound and Outbound Times Icmp Timestamp Probes Only RPM StatisticsRPM Statistics Round-Trip TimesConfiguring RPM with Quick Configuration RPM Thresholds and TrapsRPM for BGP Monitoring RPM Quick Configuration Summary Configuring RPM with Quick ConfigurationPerformance Probe Owners Router Advanced WAN Access Configuration Guide Maximum Probe Thresholds Generates Snmp traps when the threshold for standard Performance Probe Server Configuring RPM with a Configuration EditorConfiguring Basic RPM Probes Configuring RPM with a Configuration EditorSet probe customerA Configuring Basic RPM ProbesEdit services rpm Click ConfigureSet test icmp-test probe-type icmp-ping-timestamp Edit services rpm probe customerA192.178.16.5 Set test icmp-test probe-frequencyConfiguring TCP and UDP Probes Router a Configuration Configuring TCP and UDP ProbesRouter B Configuration Set probe-limit Tuning RPM ProbesTuning RPM Probes CustomerAConfiguring RPM Probes for BGP Monitoring Configuring RPM Probes to Monitor BGP NeighborsConfiguring RPM Probes to Monitor BGP Neighbors Add new entry Verifying an RPM ConfigurationDirecting RPM Probes to Select BGP Routers Directing RPM Probes to Select BGP RoutersVerifying RPM Services Verifying RPM ServicesVerifying RPM Statistics Verifying RPM Statistics Verifying RPM Probe Servers Verifying RPM Probe ServersIndex Index onIndex Series Services Router Administration Guide Index Symbols 112 Chassis Dd utility, for compact flash recovery 192 Snmp health monitor System logs Dhcp Snmp Junos Internet software Diagnosing problems from 210 Monitoring from 102 See also Snmp Permissions Radius CLI See also RPM probes Preparation Serial number Chassis components BGP TACACS+ Routing Engine, too warm Upgrades Version Hardware, displaying