Hitachi KP-FD30 specifications Special command For adjustment of a factory

15-July-2004

2) Special command (For adjustment of a factory)

Caution !!

▪The item indicated by the special command is adjusted to the optimal value at the time of factory shipments. Please perform after reading the data set up now by the lead command and memorizing a setting value, when changing this item.

▪The table shown below is written by the command (Status: 00) which does not memorize a setting value to EEPROM inside a camera. When you memorize a setting value, please set status to “01” and transmit.

a)Write command (Set data)

	Item		STX			TEXT data						ETX	SUM
				Status	ID	Area	R.No		Data
Standard sensitivity adjustment		Min	02	00	FF	01	2E	00		00	00	03	16
(Standard Gain)	[00-77]		02	00	FF	01	2E	**		00	00	03	**
		Max	02	00	FF	01	2E	77		00	00	03	08
ALC Level Ref.	[00-FF]	Min	02	00	FF	01	19	00		00	00	03	23
			02	00	FF	01	19	**		00	00	03	**
		Max	02	00	FF	01	19	FF		00	00	03	F7
Peak data Ref.	[00-FF]	Min	02	00	FF	01	3F	00		00	00	03	14
			02	00	FF	01	3F	**		00	00	03	**
		Max	02	00	FF	01	3F	FF		00	00	03	E8
Auto Iris Ref. [00-FF]		Min	02	00	FF	01	0A	00		00	00	03	1C
			02	00	FF	01	0A	**		00	00	03	**
		Max	02	00	FF	01	0A	FF		00	00	03	F0
White Balance- R gain Ref.		Min	02	00	FF	02	81	00		00	00	03	23
[0000-07FF]			02	00	FF	02	81	**		**	00	03	**
		Max	02	00	FF	02	81	FF		07	00	03	F0
White Balance- B gain Ref.		Min	02	00	FF	02	84	00		00	00	03	20
[0000-07FF]			02	00	FF	02	84	**		**	00	03	**
		Max	02	00	FF	02	84	FF		07	00	03	ED
C-Y Matrix (Gr-y,r-g)		Min	02	00	FF	02	9B	00		00	00	03	11
[0000-01FF]			02	00	FF	02	9B	**		**	00	03	**
		Max	02	00	FF	02	9B	FF		01	00	03	E4
C-Y Matrix (Gb-y,b-g)		Min	02	00	FF	02	9C	00		00	00	03	10
[0000-01FF]			02	00	FF	02	9C	**		**	00	03	**
		Max	02	00	FF	02	9C	FF		01	00	03	E3

9