KP-FD30 remote control protocol (Rev.1)
1) Comms* specifications
Sync system | |
Bit rate | 9600 bps |
Data length | 8 bits |
Start bit | 1 |
Stop bits | 1 |
Parity | None |
Bit transfer | LSB first |
*Comms : Communications
2) Comms control
The remote control software controls all communications. Data send/receive (BSC handshake) is by transferring TEXT data to the camera controller chip.
3) Comms procedure
The following pages indicate the camera controller chip and remote control software data protocol. In the description, the camera is designated as slave and the software as master.
Receive protect timer (time out error)
The receive protect timer for master and slave processes is 1 second. For example, if 1 block of TEXT data is being received, if the data interval exceeds 1 second, error is produced and the data are lost. An acknowledgment of data receipt is not produced.
1
