TEL.LINE Setup Remote Control, Remote Control YES

8.To view the other available values, "SILENCE LAPSE - 3 SECS", "SILENCE LAPSE - 4 SECS", "SILENCE LAPSE - 8 SECS", "SILENCE LAPSE - 10 SECS" or "SILENCE LAPSE - NO", press the keys:

If you select "SILENCE LAPSE - NO", the fax machine

will not interrupt the recording in any case.

9.To confirm your choice, press the key:

10.To return the fax machine to its initial stand-by mode, press the key:

11.If you want to move back one function, press the key:

TO CHANGE THE REMOTE CONTROL CODE

If the fax machine is connected to an extension that operates in tone dialling mode and is set up for manual reception, whenever there is a call from a corre- spondent wishing to send you a document, you can set it to receive the document by typing the code * * on the extension. This operation has the same effect as press-

ing the key on the fax machine.

You can replace the second "asterisk" of this code us- ing digits from 0 to 9.

1.Press the key:

The display shows:

RECEPT. SET-UP

2.Press the keys

until the display shows:

INSTALLATION

STATION NAME

4.Press the keys

until the display shows:

INSTALLATION

TEL.LINE SETUP

5.Press the key:

The display shows:

TEL.LINE SETUP

LINE TYPE

6.Press the keys

until the display shows:

TEL.LINE SETUP

REMOTE CONTROL

7.Press the key:

The display shows:

REMOTE CONTROL

YES

8.Press the key:

The display shows the code you set previously, for example:

SET ACCESS CODE

(0-9,*) **

9.To type the new code, press the keys:

10.To confirm the new code, press the key:

11.To return the fax machine to its initial stand-by mode, press the key:

12.If you want to move back one function, press the key:

NOTE

If you want to disable this function, after step 7, press the keys to display "REMOTE CONTROL - NO", then press the

key to confirm and the key to return the fax machine to its initial stand-by mode.

TO SET THE BLACK LIST

As mentioned previously, you can save a series of un- wanted numbers on a black list (max. 10) so as to avoid receiving documents from the correspondents on this list.

1.Press the key:

The display shows:

RECEPT. SET-UP

2.Press the key:

The display shows: