Olivetti 145D manual DE-REGISTER Handset, Transfer to Handset, Internal Call to Handset

5.To select the number that corresponds to the desired base unit or the "AUTO" option, press the upper or lower part of the key:

If you select "AUTO", the cordless phone will

automatically use any available base unit on which it has been registered. If a specific base unit is selected, the cordless phone will receive and make calls exclusively from that base unit.

6.Keep pressed the key:

The cordless phone returns automatically to stand-by mode.

TO DELETE A CORDLESS PHONE

If desired, you can delete a cordless phone from the base unit. Remember however that you cannot delete the cordless phone that you are using.

1.On the cordless phone, press the upper or lower part of the key

until the display shows:

REGISTRATION

2.Press function key F3:

The display shows:

REGISTER BASE

3.Press the upper or lower part of the key

until the display shows:

DE-REGISTER HANDSET

4.Press function key F3:

The display shows:

PIN CODE ?

5.Type the PIN on the keypad of the cordless phone. Then press function key F3:

The display shows:

1 2 3 4 5

6.Select the number of the cordless phone you wish to delete. To do this, press the upper or lower part of the key:

7.To confirm your choice, press function key F3:

The cordless phone selected is deleted while the cordless phone you are using returns automatically to stand-by mode.

TO TRANSFER A CALL AND/OR START A THREE-PARTY

CONFERENCE CALL

If desired, while making external telephone call on the cordless phone, you can transfer the call to another compatible cordless phone or to the fax machine.

1.During the call, keep pressed for more than 1.5 seconds the key:

The display shows:

TRANSFER TO HANDSET

The external party is put on hold.

2.On the keypad of the cordless phone, type the number of the compatible cordless phone to which you want to transfer the call (to transfer the call to the fax machine, type 0). Then press function key F3:

3.If you have transferred the call to a compatible cordless phone, when the internal party answers the call, you can talk to him. If you have transferred the call to the fax machine you cannot call the internal party.

4.To start a three-party conference call (only possible between 2 compatible cordless phones and the external party), skip to step 5. If you simply want to transfer the call, press the key:

The cordless phone returns automatically to stand-by

mode.

5.To start the three-party conference call, press function key F1:

6.At the end of the conversation, press the key:

The cordless phone returns automatically to stand-by

mode.

NOTA

If the internal party does not answer the transferred call, press

the key again for more than 1.5 seconds to reconnect to the external party.

TO START AN INTERNAL CONVERSATION BETWEEN

CORDLESS PHONES

This type of conversation is only possible between 2 compatible cordless phones registered on the base unit. These calls, which are free of charge, enable cordless phones to communicate with one another when they are covered by the same base unit.

1.While the cordless phone is in stand-by mode, press the key:

The display shows:

INTERNAL CALL TO HANDSET

2.On the keypad of the cordless phone, type the number of the compatible cordless phone you want to call. Then, press function key F3:

3.When the internal party answers the call, you can talk to him.

4.At the end of the conversation, press the key:

The cordless phone automatically returns to stand-by

mode.

6 4