Various Sett TX Report, TX Report For Failed TX | Olivetti 145D

TO ENABLE/DISABLE THE AUTOMATIC PRINTING OF THE

TRANSMISSION AND FAILED TRANSMISSION REPORT

1.Press the key:

The display shows:

MENU

RECEPT. SET-UP

2.Press the keys

until the display shows:

MENU

FAX SET-UP

3.Press the key:

The display shows:

FAX SET-UP

DATE AND TIME

4.Press the keys

until the display shows:

FAX SET-UP

VARIOUS SETT.

5.Press the key:

The display shows:

VARIOUS SETT.

ECM

6.Press the keys

until the display shows:

VARIOUS SETT.

TX REPORT

7.Press the key:

The display shows:

TX REPORT

FOR FAILED TX

You can choose any of the following options: "TX RE- PORT - ALWAYS" and "TX REPORT - NO".

TX REPORT - FOR FAILED TX - the fax machine will automatically print a report only after each failed trans- mission.

TX REPORT - ALWAYS - the fax machine will automati- cally print a report after each transmission irrespective of the result.

TX REPORT - NO - the fax machine will not print any report.

8.To view the other available options, press the keys:

9.To confirm the setting, press the key:

10.To return the fax machine to its initial stand-by mode, press the key:

11.If you want to move back one function, press the key:

TO PRINT THE TRANSMISSION, ACTIVITY, BROADCAST

TRANSMISSION AND CALLER ID REPORTS ON REQUEST

1.Press the key:

The display shows:

MENU

RECEPT. SET-UP

2.Press the keys

until the display shows:

MENU

PRINT REPORT

3.Press the key:

The display shows:

PRINT REPORT

LAST TX REPORT

You can choose any of the following options: "PRINT REPORT - LAST BROADCAST", "PRINT REPORT - ACTIVITY REPORT" and "PRINT REPORT - CALLER ID LIST".

4.To view the other available options, press the keys:

5.To confirm the setting, press the key:

Having printed the report, the fax machine automati- cally returns to its initial stand-by mode.

LISTS

At any time, you can print a complete list of the installa- tion parameters, set-up parameters and disabled num- bers as well as print the data saved in the phone book (the lists may only be managed from the fax machine).

By printing out the lists of installation and setup parameters, you will obtain an up to date report of the default values and those that you have set to adapt it to your operating require- ments.

3 7

Image 39

Olivetti 145D manual Various Sett TX Report, TX Report For Failed TX, Menu Print Report, Print Report Last TX Report, Lists

Contents

Instructions Date of publication September EDITED/PUBLISHED/PRODUCEDBY Table of Contents First Section Page To dispose of our devices correctly Safety PrecautionsConsulting the Manual Environmental Recycling About the Installation and Setup Parameters Operating PrecautionsImproper USE FAX MACHINE’S Console About the Product Gives access to the Phone book Function key F2 Cordless Phone Keypad Or Communication icon Cordless Phone Display Maximum capacity 5 sheets of A4 Components Connecting to the Telephone Line Power Supply Package ContentsInstallation Conditions Fax machine a Remove the lid of the battery comPartment as indicated by the ar Rows Lingua English Menu InstallationInstallation Station Name Lingua Italiano SET DATE/TIME XX-XX-XX Installation LanguageLanguage English Menu SET DATE/TIME Key Installation TEL.LINE SetupThis procedure may only be carried out from the fax machine To switch from the public line to the private line To modify the dialling mode TEL.LINE Setup Line TypeTEL.LINE Setup Dial Mode Dial Mode Tone Installation Station Number FAX SET-UP Various SettVarious Sett ECM FAX Header Outside Setting UP the FAX MachineVarious Sett FAX Header FAX Header Inside SET Date Date and Time SettingsCartridge LOW Change Cartridge Transmission Menu Print FUNC.LISTDocument Ready To Print the Menu and ITS Functions To start receiving a document from the cordless phone, see RECEPT. SET-UP Reception ModeReception Mode Automatic Reception Put a telephone call on hold by pressing Using the TelephoneReception in PHONE/FAX Mode On Line Incoming Calls Û Outgoing Calls Ü Call Transfer Please WaitDo not place the document in the ADF Contrast Normal Remote Access On LineQuality High Zoom If you want to abort the copy in progress, press Table of Contents Second Section Page To Send a Document To start sending the document, press the key To Adjust the ResolutionVarious Sett Contrast Contrast Normal On Line To hear the dialling tones, press the key The display showsFrom the display, press the key Menu TX from Memory TX from Memory NEW SettingPrint Settings Confirm Settings YES To Receive a Document RECEPT. SET-UP Reception ModeReception Mode Automatic TX from Memory Edit Menu Phone Book ConnectingIf, when a call is received, you pick up the call before Phone Book Enter Name Phone Book NEW NumberType Position 01TYPE Name DELETE? To confirm the setting, press function key F2Phone Book Edit Phone Book Delete To confirm the setting, press function key F1 Display shows Delete Entry ?Phone Book Print Phone B To Print Reports and Lists Print Report Last TX Report Various Sett TX ReportTX Report For Failed TX Menu Print Report FAX SET-UP Print Config Menu InstallationInstallation Station Name Installation Print Install To delete messages and memos that have already been played To Turn on the TADTAD Console Addition, from the cordless phone, you can TAD SET-UP ICM on Speaker Security and Access FunctionsSecurity SET Access Code Menu TAD SET-UP Outgoing Messages and Memos Record OGM #1 Lift Handset Record OGM #1 To RecordPlaying To SET the Length of Memos Incoming Messages To Delete Messages and Memos YOU have Already Listened to To Listen to Incoming Messages MemosTAD/FAX TAM Messages Number of messages remaining after deletion. In this case Type the access code on the remote telephone keypadDelete OLD MSG? Delete OLD MESSAGES? Toll Saver Special Functions of the Telephone Answering DeviceTAD SET-UP Toll Saver TAD SET-UP Announce only TAD SET-UP Print SET-UP To Print the TAD Configuration ParametersRecord OGM Lift Handset Record OGM To Record Printer Param Surplus Other Useful Reception SettingsFAX SET-UP Printer Param Printer Param Reduction Number or name of the correspondent who called you To ENABLE/DISABLE Silent ReceptionRECEPT. SET-UP Silent RX Press the key Until the display shows RECEPT. SET-UP Ring Volume Installation TEL.LINE SetupTEL.LINE Setup Line Type TEL.LINE Setup Caller ID Autodetect Ring Ring Volume LevelInstallation DISTINCT. Ring DISTINCT. Ring SET Option To Change the Silence Lapse TEL.LINE Setup FAX/TEL TimerTEL.LINE Setup Silence Lapse To Change the Length of the Acoustic Signal Black List NEW Number TEL.LINE Setup Remote ControlRemote Control YES RECEPT. SET-UP Black List To Modify the Black List 0TYPE NumberBlack List Modify Number Black List Delete Number FAX Header Inside Other Useful Transmission SettingsBlack List Print List Various Sett FAX Header To Regulate the Speaker Volume TEL.LINE Setup Line MonitorVarious Sett Buzzer Volume To raise or lower the volume of the speaker, press the key To ENABLE/DISABLE ECM Buzzer Volume LevelTEL.LINE Setup PBX Flash To ENABLE/DISABLE the Flash Function Menu Polling RX Receiving a Document in Polling ModePolling RX NEW Setting ECM YES To Delete a Polling Reception That has Been SET Polling RX ChangePolling RX Delete To Change a Polling Reception That has Been SET Handset Ringer Melody Handset SettingsHandset Ringer Volume External Volume Handset Name KEY TonesTo exit from programming mode, press function key F1 twice Alarm Repeat SettingsRestore Settings SET Alarm Search for Basex Registration Please WAIT…Registration Register Base External party is put on hold DE-REGISTER HandsetTransfer to Handset Internal Call to Handset If the Transmission is Unsuccessful What Happens When a Document isProblems on the FAX Machine What Happens if the Paper or INK has RUN OUT Code Message Cause of Error What to do Error Codes Signals and Messages on the FAX Machine TX Error Illegal SettingPaper ERROR, Press RX Error NEW Print CART.?, 1=YES 0=NO DiallingDOC.N Line on HOLD, Press Hold Problem Solution Problems on the Cordless Phone Menu CART. Mainten To Replace the Print Cartridge With the fax machine disconnected from the power socket Cleaning the Print Cartridge Testing the NozzlesTo Clean the Electrical Contacts Print Cartridge CART. Mainten Clean Cartridge Lever, as indicated by To Clean the Optical ReaderOptical reader with a cloth Cated by the arrow To Remove Jammed Documents To Clean the Casing To Remove Jammed Sheets of Paper To Change the Batteries Cordless Phone Manufacturer Customer Service Fax machine Battery charger Connection Cleaning CasingSetting up Customer Service Paper or ink has run out MaintenanceTroubleshooting Power supply Setup ResolutionRing volume Safety To set the black list 2006/95/EC dated 27th December Page Page FJ31 259749B-01