Olivetti 145D manual 2006/95/EC dated 27th December

MANUFACTURER’S CE DECLARATION of CONFORMITY according to ISO/IEC 17050

OLIVETTI S.p.A Via Jervis, 77 - IVREA (TO) - ITALY

Declares under its sole responsibility that:

the product described in this guide

is in compliance with directive 99/5/EC dated 9th march 1999

fulfill the essential requirements of Electromagnetic Compatibility and of Electrical Safety as prescribed by the Directives:

89/336/EEC dated 3rd May 1989 with subsequent amendments (Directive 92/31/EEC dated 28th April 1992 and Directive 93/68/EEC dated 22nd July 1993);

2006/95/EC dated 27th December 2006;

since designed and manufactured in compliance with the following European Harmonized Standards:

EN 55022/A2 : 2003 (Limits and methods of measurements of radio interference characteristics of Information Technology Equipment) / Class B;

EN 61000-3-2/A1: 2002 (Electromagnetic Compatibility (EMC) - Part 2 : Limits - Section 2 : Limits for harmonic current emissions (equipment input current ≤ 16 A per phase);

EN 61000-3-3/A1: 2002 (Electromagnetic Compatibility (EMC) - Part 3 : Limits - Section 3 : Limitation of voltage fluctuations and flicker in low voltage supply systems for equipment with rated current up to and including 16A);

EN 55024/A1 : 2002 (Electromagnetic Compatibility - Information technology equipment - Immunity characteristics - Limits and methods of measurement);

EN 60950-1/A1 : 2004 (Safety of Information Technology Equipment, including electrical business equipment).

Moreover the model is in compliance with following Standards:

ETSI TBR 38 : May 1998 Requirements for a terminal equipment incorporating an analogue handset function capable of supporting the justified case service when connected to the analogue interface of the PSTN in Europe.

ETSI ES 203 021 : January 2006 Access and Terminal (AT); Harmonized basic attachment requirements for Terminals for connection to analogue interfaces of the Telephone Networks.

ETSI EN 301 406 : 2003 Digital Enhanced Cordless Telecommunications (DECT); Harmonized EN for Digital Enhanced Cordless Telecommunications covering essential requirements under article 3.2 of the R&TTE Directive Generic radio. ETSI EN 301 489-6 : 2002 Electromagnetic compatibility and radio spectrum Matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part6: specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment.

ETSI EN 301 489-1 : 2005 Electromagnetic compatibility and radio spectrum Matters (ERM); Electromagnetic

compatibility (EMC) standard for radio equipment and services; Part1: Common technical requirements.

Compliance with the above mentioned essential requirements is shown by affixing the CE marking on the product.

Scarmagno, 8th march 2007

Olivetti S.p.A.

Notes: 1) CE Marking has been affixed in 2007.

2) The Quality System is in compliance with the UNI EN ISO 9000 series of Standards.

Olivetti S.p.A. Sede Sociale Ivrea,Via Jervis,77 – Cap. Soc. Euro 154.000.000 – C.C.I.A.A. Torino n. 547040 – Trib Ivrea Reg. Soc. n. 1927 – Cod. Fisc. e Part. IVA 02298700010