Olivetti 145D manual Edited/Published/Producedby, Date of publication September

EDITED/PUBLISHED/PRODUCEDBY:	Printed in Thailand.
Olivetti S.p.A. con unico azionista	Code of user manual: 259749B-01
Gruppo Telecom Italia
Direzione e coordinamento di Telecom Italia S.p.A.	Date of publication: September 2007.

Copyright © 2007, Olivetti

All rights reserved. No parts of this manual may be photocopied, reproduced or translated into other languages with- out prior written authorization from Olivetti S.p.A.

The manufacturer reserves the right to make any changes to the machine described in this manual, at any time, and without prior warning.

This machine has been approved, under the terms of Council Decision 98/482/EC, for Europe-wide connection as a single terminal to an analogue Public Switched Telephone System (PSTN) system. However, due to differences between individual PSTNs in the various countries, the approval does not unconditionally guarantee success operation of every PSTN termination point.

The cordless phone supplied conforms to the DECT (Digital European Cordless Technology) and GAP (Generic Access Profile) standards.

If you encounter any problems, you should contact your supplier immediately.

The manufacturers declare under their own responsibility that this product complies with provisions laid down by the directive 1999/05/CE (the full declaration can be found at the end of this manual).

0168

Network compatibility declaration

This product has been designed and developed to operate in the networks of all European Community countries, and in those of Switzerland and Norway.

Full compatibility with the networks of individual countries will depend on specific national software parameters which can be set in the product. If you encounter problems with non EC PSTN networks, contact your national technical support service.

Your attention is drawn to the following conditions that could compromise the conformity attested above as well as the machine’s characteristics:

•incorrect electrical supply;

•incorrect installation, erroneous or improper use, or any use that differs from what is indicated in the User Manual supplied with the machine;

•replacement of components or original parts using other types, not approved by the manufacturer, or where carried out by unauthorized persons.

The electrical socket must be near to hand and easily accessible. To disconnect the machine from the electrical power supply, unplug it from the supply socket.