Olivetti 145D About the Installation and Setup Parameters, Operating Precautions, Improper USE

OPERATING PRECAUTIONS

•Keep the fax machine and cordless phone in a dust-free place away from sources of water, steam and excessive heat. Do not expose them to direct sunlight.

•Avoid leaving books, documents, or other objects that may obstruct normal ventilation in any way around the fax ma- chine.

•Use the fax machine and cordless phone exclusively at a temperature of between 5°C and 35°C and a relative humidity of between 15% and 85%.

•Keep them away from other electrical and electronic appli- ances that may cause interference, e.g. radios, televisions, etc.

•If a voltage drop or power failure occurs, it will not be possible to make or receive telephone calls on the fax machine or cordless phone: the keypad of the fax machine will be disa- bled and the cordless phone will not have access to the phone line as the fax machine is not powered.

•In an emergency, if you wish to make a call, you must use a telephone certified by the telephone company, connecting it directly to the fax machine (in countries where this is allowed) or directly to the telephone wall socket.

•Leave enough room in front of the outlet from which docu- ments and received/copied documents are unloaded, so that they do not fall on the floor.

IMPROPER USE

The fax machine was designed to send and receive docu- ments and to copy paper documents. The machine may also be used as a telephone. All other uses are to be considered improper. In particular, it is never to be connected directly to an ISDN line and, if it is, the guarantee becomes null and void. The cordless phone conforms to the DECT (Digital Eu- ropean Cordless Technology) and GAP (Generic Access Pro- file) standards and was designed for use as a telephone and for managing some of the fax machine’s functions.

ABOUT THE INSTALLATION AND SETUP

PARAMETERS

As the country default values for each installation and setup parameter may change due to certification requirements or specific customers’ needs, these values do not always corre- spond to those indicated in the manual: it is therefore advis- able to print them before changing them (see "To print re- ports and lists", chapter "Transmission and reception operations").

4