Olivetti 145D To Clean the Casing To Remove Jammed Sheets of Paper, To Remove Jammed Documents

NOTE

To check whether the optical reader is clean, make a copy of a blank sheet. If any vertical lines appear on the copy and the optical reader looks perfectly clean, contact qualified techni- cal staff.

TO CLEAN THE CASING

TO REMOVE JAMMED SHEETS OF PAPER

If the paper used to print received documents or to copy docu- ments gets jammed (this error is signalled on the display by the message "PAPER ERROR, PRESS <I>"), try to unload

the sheet by pressing the key. If the sheet is not un- loaded, remove it manually as follows:

1.Unplug the fax machine from the power outlet and the telephone socket.

2.Use exclusively a soft, lint-free cloth dampened with a neutral detergent diluted with water.

TO REMOVE JAMMED DOCUMENTS

During transmission or copying, a document could get jammed (this condition is signalled by the display showing the message: "REMOVE DOCUMENT, PRESS <I>").

Try to unload the document by pressing the key. If the document is not unloaded, remove it manually as follows:

1

or

2

1.Pull the sheet upwards, taking care not to tear it.

2.Pull the sheet downwards, tak- ing care not to tear it.

1

or

2

1.Pull the document upwards, tak- ing care not to tear it.

2.Pull the document downwards, taking care not to tear it.

NOTE

Never use pointed objects to remove jammed sheets of paper.

NOTE

If you cannot manage to remove the jammed document or sheet of paper after performing the removal operations, it may be trapped inside the fax machine. If this is the case, proceed as follows:

1.	Lower the handset and place it on a stable surface (see fig. 1
	of procedure "To clean the optical reader").
2.	Open and lift the operator console (see fig. 2 of procedure "To
	clean the optical reader").
3.	Move the print cartridge carriage to the left-hand edge of the
	fax machine (see fig. 3 of procedure "To clean the optical
	reader").

NOTE

Never use pointed objected to remove jammed documents.

4.	Release the paper feed roller by pressing the lever (see fig.
	4 of procedure "To clean the optical reader").
5.	Remove the roller from its compartment (see fig. 5 of proce-
	dure "To clean the optical reader").
6.	Remove the jammed document or sheet of paper.
7.	Place one end of the roller on the pin situated on the left-hand
	side of the fax machine (see fig. 7 of procedure "To clean the
	optical reader").
8.	Engage the roller by pressing the lever (see fig. 8 of proce-
	dure "To clean the optical reader").
9.	Close the operator console and put the handset back on its
	support.

7 4