Controlling the Onkyo Network Tuner
Connect an Onkyo Network Tuner to the integrated amplifier and enjoy its music. You can use the integrated amplifier’s remote controller to control the Network Tuner, but the functionality will depend on your Network Tuner’s input.
To control the Onkyo Network Tuner, an u connection is required (➔ page 20).
To control the Onkyo Network Tuner with the integrated amplifier’s remote controller, you need to change the input name to “TUNER” (➔ page 35).
8
DIMMER
!/"/#/$
ENTER
Tuner control buttons
8button
Sets an Onkyo Network Tuner to Standby.
DIMMER button
Adjusts the display brightness.
!/"/#/$and ENTER buttons
Select and adjust settings.
SHUFFLE button
Performs shuffle playback. (When the Network Tuner’s input is set to USB or AirPlay.)
MENU button
Returns to the top menu of the Internet Radio service. (When the Network Tuner’s input is set to NET.)
REPEAT button
Cycles through the repeat back modes. (When the Network Tuner’s input is set to USB or AirPlay.)
7button
Selects the beginning of the current song. Pressing this button twice selects the previous song. (When the Network Tuner’s input is set to USB or AirPlay.) Selects the previous Internet radio station. (When the Network Tuner’s input is set to NET.)
Selects the previous radio preset. (When the Network Tuner’s input is set to TUNER.)
1/3button
Starts or pauses playback. (When the Network Tuner’s input is set to USB, NET or AirPlay.)
6button
Selects the next song. (When the Network Tuner’s input is set to USB or AirPlay.)
Selects the next Internet radio station. (When the Network Tuner’s input is set to NET.)
Selects the next radio preset. (When the Network Tuner’s input is set to TUNER.)
INPUT button
Cycles through the input sources.
En
34