Connecting a Turntable
Integrated Amplifier
MM/MC selector
L
R
AUDIO
OUTPUT
Turntable without a built-in phono preamp
Use the MM/MC selector on the back of the integrated amplifier to select either MM or MC, in accordance with the cartridge format of the turntable.
Remove the short pins plugged into the jacks before connecting a turntable to the PHONO inputs.
Note
• Always turn off the integrated amplifier before switching between MM and MC.
Tip
•If your turntable has a
•If your turntable has a ground wire, connect it to the GND screw. With some turntables, connecting the ground wire may produce an audible hum. If this happens, disconnect it.
Connecting a Cassette Tape Deck
Integrated Amplifier
L | R |
| AUDIO |
| OUT |
Cassette tape deck
Tip
• Connect your cassette tape deck to either of the following jacks: LINE IN 1/2/3.
En
21
