Onkyo A-9070 instruction manual e f g h, j k l, Rear Panel, gMM/MC selector, hGND screw

Rear Panel

a b c d

e f g h

aSPEAKERS A terminals Connect Speakers A.

buREMOTE CONTROL jacks

i	j k l	m
	i LINE IN 1/2/3 L/R jacks
	Connect playback devices with analog audio output.

jLINE OUT L/R jacks

Connect Onkyo components such as Onkyo Docks, CD Players, or Network Tuner with u(Remote Interactive) jacks.

cDIGITAL IN COAXIAL 1/2 jacks

Connect components such as CD players with coaxial digital audio output.

dDIGITAL IN OPTICAL jack

Connects components such as CD players with optical digital audio output.

eSPEAKERS B terminals Connect Speakers B.

fPHONO (MM/MC) L/R jacks

Connect a turntable with analog audio output.

gMM/MC selector

Set this selector according to the turntable’s cartridge format (MM/MC).

hGND screw

Connects the turntable’s ground wire.

Connect components such as analog line-level sources. The input signals are output with no level adjustment.

kPRE OUT L/R jacks

Connect a power amplifier when the integrated amplifier is used as a preamplifier (Pre mode).

lMAIN IN L/R jacks

Connect a preamplifier when the integrated amplifier is used as a power amplifier (Main mode).

mAC INLET

Connects the supplied power cord. The other end of the power cord should be connected to a suitable wall outlet.

See “Connections” for connection information (➔ pages 13 to 25).

En

11