Onkyo A-9070 Restoring the Default Settings, Press SETUP, Press !/repeatedly to select “RESET”

Restoring the Default Settings

You can restore the default settings of the integrated amplifier.

■Operating with the remote controller

!/"/#/$

ENTER

RETURN

SETUP

1 Press SETUP.

2 Press !/"repeatedly to select “RESET”.

3 Press ENTER.

The current setting flashes on the information display.

4 Press #/$to switch between “RST-NO” and “RST-YES”.

`RST-YES:

Restores the default settings.

`RST-NO:

Cancels the operation.

5 Press ENTER.

If “RST-YES” is selected, “CLEAR” appears on the information display. The integrated amplifier then automatically turns off.

If “RST-NO” is selected, the setup returns to “RESET”.

■Operating on the integrated amplifier

SETUP INPUT selector

1 Press SETUP repeatedly to select “RESET”.

2 Use the INPUT selector to switch between “RST-YES” and “RST-NO”.

First, the current setting flashes on the information display. Then, the setting is switched while flashing.

3 Press and hold down SETUP.

If “RST-YES” is selected, “CLEAR” appears on the information display. The integrated amplifier then automatically turns off.

If “RST-NO” is selected, the setup returns to “RESET”.

Note

•The integrated amplifier will end the setup if there is no operation for 8 seconds.

En

40