Setting the Auto Standby Function
When the Auto Standby (ASb) function is activated, the integrated amplifier will automatically enter Standby mode if there is no operation for 30 minutes with no audio signal input.
■Operating with the remote controller
!/"/#/$
ENTER
RETURN
SETUP
1 Press SETUP.
2 Press !/"repeatedly to select “ASb”.
3 Press ENTER.
The current setting is displayed.
4 Press #/$to switch between
`ASb-ON:
Enables Auto Standby.
`ASb-OFF:
Disables Auto Standby.
The setting is automatically confirmed.
5 Press RETURN repeatedly to exit the setup.
Once the Auto Standby (ASb) function has been activated, the integrated amplifier will not automatically turn on even if it receives a signal. To turn on the integrated amplifier, press 8ON/STANDBY on the integrated amplifier or 8on the remote controller manually.
■Operating on the integrated amplifier
SETUP | INPUT selector | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 Press SETUP repeatedly to select “ASb”.
2 Use the INPUT selector to switch between
First, the current setting flashes on the information display. Then, the setting is switched ON/OFF. The setting is automatically confirmed.
3 Press SETUP repeatedly to exit the setup.
Tip
•Depending on the countries, the default setting is ON (European models) or OFF (North American models).
Note
•When the Auto Standby (ASb) function is activated, Onkyo components connected via u are automatically turned off (➔ page 20).
•Before entering Standby mode with the Auto Standby (ASb) function, the message “ASb” flashes for 30 seconds on the information display.
•The integrated amplifier will end the setup if there is no operation for 8 seconds.
En
38