Onkyo A-9070 Setting the Headphone Level, Press SETUP, Press !/repeatedly to select “HPLVL”

Setting the Headphone Level

You can set the volume when using headphones.

■Operating with the remote controller

!/"/#/$

ENTER

RETURN

SETUP

1 Press SETUP.

2 Press !/"repeatedly to select “HPLVL”.

3 Press ENTER.

The current level is displayed.

4 Press #/$repeatedly to adjust the offset level.

You can adjust the offset level from -12 dB to +12 dB in 1 dB steps.

The setting is automatically confirmed.

5 Press RETURN repeatedly to exit the setup.

■Operating on the integrated amplifier

SETUP INPUT selector

1 Press SETUP repeatedly to select “HPLVL”.

2 Use the INPUT selector to adjust the offset level.

First, the current level flashes on the information display. Then, the value is adjusted.

The setting is automatically confirmed.

3 Press SETUP repeatedly to exit the setup.

Tip

• The default level is 0.

Note

•The integrated amplifier will end the setup if there is no operation for 8 seconds.

En

37