Dell DL2200 Thermal sensor, Not detected, Clock stopped, Time-of-day not, Set please run

Message	Causes	Corrective Actions
Thermal sensor	A memory module without a	Replace the memory
not detected	thermal sensor is installed in	module. See "System
on x.	the specified memory slot.	Memory" on page 80.
Time-of-day	Faulty battery or faulty chip.	See "Troubleshooting the
clock stopped.		System Battery" on page 134.
Time-of-day not	Incorrect Time or Date	Check the Time and Date
set - please run	settings; faulty system	settings. See "Using the
SETUP program.	battery.	System Setup Program and
		UEFI Boot Manager" on
		page 39. If the problem
		persists, replace the system
		battery. See "System Battery"
		on page 108.
Timer chip	Faulty system board.	See "Getting Help" on
counter 2 failed.		page 157.
TPM	A TPM configuration	Information only.
configuration	command has been entered.
operation	The system reboots and
honored. System	executes the command.
will now reset.
TPM	This message displays during	Enter I or M to proceed.
configuration	system restart after a TPM
operation is	configuration command has
pending. Press	been entered. User

(I)to Ignore interaction is required to

OR (M) to Modify proceed. to allow this

change and reset the system.

WARNING: Modifying could prevent security.

TPM failure	A Trusted Platform Module	See "Getting Help" on
	(TPM) function has failed.	page 157.

32

About Your System