Dell DL2200 owner manual 109

Figure 3-20. Replacing the System Battery

1

3

			2
1	system battery	2	negative side of battery connector
3	positive side of battery connector

4If installed, remove the expansion card from the expansion-card slot. See "Removing an Expansion Card" on page 92.

5If installed, remove the storage controller card. See "Removing the Storage Controller Card" on page 95.

6To remove the expansion-card riser, press the blue tabs on the expansion-card riser and lift it from the chassis. See "Removing an Expansion-Card Riser" on page 93.

7Locate the battery socket. See "Jumpers and Connectors" on page 151.

CAUTION: To avoid damage to the battery connector, you must firmly support the connector while installing or removing a battery.

8Support the battery connector by firmly holding the positive side of the connector.

Installing System Components

109