Custom Setup
You can perform custom settings using SETUP on the remote controller or the integrated amplifier. The SETUP menu allows you to set the following items: NAME, SHOW, HPLVL, ASb, ROUTE, and RESET.
CD
SACD
MD
TAPE
TUNER
NAME 
DOCK
PC
GAME
TV
L1
L2
L3
CX1
SHOW 
PNO
OPT
CX2
HPLVL 
HP 
HP
HP +12
ASb | |||
ROUTE | NORMAL | PRE | |
MAIN SPLIT | |||
| |||
RESET 
RST-YES
Note
•When “ROUTE” is set to “MAIN”, the “NAME”, “SHOW”, “HPLVL” and “ASb” settings are not available.
•When the “PHONO” input is selected, “NAME” setting is not available.
Changing Input Names
You can change the name of the currently selected input. Choose a name from the following: CD, SACD, MD,
TAPE, TUNER, TV, GAME, PC, DOCK
■Operating with the remote controller
!/"/#/$
ENTER
RETURN
SETUP 
1 Press SETUP.
2 Press !/"repeatedly to select “NAME”.
3 Press ENTER.
The name currently assigned to the input flashes.
4 Press #/$repeatedly to select the name you want to assign.
The selected name flashes.
5 Press ENTER.
The selected name flashes rapidly for a few times as the setting is confirmed.
6 Press RETURN repeatedly to exit the setup.
■Operating on the integrated amplifier
SETUP | INPUT selector | |||
|
|
|
|
|
|
|
|
|
|
1 Press SETUP repeatedly to select “NAME”.
2 Use the INPUT selector to select the name you want to assign.
First, the currently assigned name flashes on the information display. Then, the assignable names are displayed flashing.
3 Press and hold down SETUP.
The selected name flashes rapidly for a few times as the setting is confirmed.
4 Press SETUP repeatedly to exit the setup.
Tip
• By default, input names are set according to the terminal names.
Note
•If you assign a name that is already used on another input, the name of that other input will be restored to its default.
•When the “PHONO” input is selected, “NAME” setting is not available.
•The integrated amplifier will end the setup if there is no operation for 8 seconds.
En
35
