Onkyo instruction manual Separating the Pre-ampand Main Amp Units, Integrated Amplifier A-9070

Separating the Pre-amp and Main Amp Units

You can use the integrated amplifier’s pre-amp and main amp units individually (Split mode) to connect a sound processor such as a graphic equalizer between the pre-amp and main amp units.

Important:

•Always turn the integrated amplifier off before connecting the MAIN IN jacks.

•To use this mode, you need to change the “ROUTE” setting (➔ page 39).

Integrated Amplifier A-9070

L	R	L	R
	INPUT		OUTPUT

e.g., graphic equalizer

Note

•Depending on the sound processor used, noise may be produced upon switching the integrated amplifier on and off. In this case, turn on each device in the following sequence: sound processor, integrated amplifier. Turn off each device in the following sequence: integrated amplifier, sound processor.

En

24