Honeywell TE242ELW user manual Troubleshooting, Specifications

TROUBLESHOOTING

Check here before contacting customer service.

Issue	Symptom	Solution
Main unit	US Atomic Time	Place unit by the window and
	signal is not received	keep it there overnight
Remote sensor	Cannot locate remote	Check batteries
	sensor	Check location
		Press and hold DOWN ( ▼)
		button on the main unit to search
		for the signal form the remote
		sensor
	Cannot change the	Press “RESET” after setting the
	channel	channel
	Cannot change the	Press “RESET” after setting C/F
	C° to F° and back
	Data does not match	Initiate manual sensor search
	data on the main unit	(Press and hold DOWN ( ▼)
		button on the main unit)

SPECIFICATIONS

Main Unit

Indoor Temperature

Proposed operating range: 23.0°F to 122.0°F (-5°C to +50°C)

Temperature resolution: 0.2°F (0.1°C) User-selectable (°F or °C) temperature display Maximum number of remote sensors: 3 (one included) Readings update interval: every 45 seconds

EL backlight

Low battery indicators – for each remote channel and main unit

Clock

Precise atomic time 4 US Time Zones 12/24 hour time format

Crescendo 4 minutes alarm with 5 minutes snooze

Remote Sensor

Remote Temperature

Proposed operating range with alkaline batteries: -4°F to + 158°F (-20°C to + 70°C)

Proposed operating range with lithium batteries: -38.8°F to +158°F (-38.8°C to + 70°C) Temperature resolution: 0.1°C/0.2°F

RF Transmission Frequency: 433 MHz

RF range: Maximum 200 feet (60 meters)

Temperature transmission cycle: approximately 45 seconds Low battery indicator

Wall-mount of Table stand

Power

Main unit: 2 AA size (UM-3) 1.5V batteries (not included)

Remote Sensor: 2 AAA size 1.5V batteries (not included)

Dimensions

Main unit: 3.15(L) x 5.98 (H) x 0.91(D) inches

Remote sensor: 2.35(L) x 3.77(H) x 0.86(D) inches

19 19 20