Muting the Sound
You can temporarily mute the output of the integrated amplifier.
MUTING
Using Headphones
PHONES jack
1 Press MUTING.
The message “MUTING” flashes on the information display.
To unmute the integrated amplifier, press MUTING again.
Note
•While the integrated amplifier is muted:
–Adjusting the volume or setting the integrated amplifier to Standby will unmute the integrated amplifier.
–Pressing INPUT!/"on the remote controller or turning the INPUT selector on the integrated amplifier will display the current input for 3 seconds.
•If MUTING is pressed while a setting is being performed, the setup will be terminated.
•Even if the power cord is unplugged, the muting function will be maintained on to the next session.
1 Connect a pair of stereo headphones with a standard plug (1/4 inch or 6.3 mm) to the PHONES jack.
When connecting the headphones, the message
“PHONES” appears on the information display and the A/B LEDs go off.
You can adjust the volume and mute the sound, by using VOLUME q/w.
While headphones are connected, no sound is output from the speakers and PRE OUT jacks.
Tip
•If there’s a volume difference between your speakers and your headphones, you can adjust the offset level (➔ page 37).
Note
•Always turn down the volume before connecting your headphones.
•When headphones are connected, the balance adjustment and SPEAKERS are disabled. Pressing the buttons will display the message “PHONES”.
En
31
