Panasonic AG-EZ50UP ªMulti-Picture Mode VCR Mode l32, ªSelecting the Sound during Playback

ªMulti-Picture Mode (VCR Mode) (l32)

≥The quality of Multi images deteriorates slightly.

≥Playback multi-mode screens cannot be output through DV Terminal.

≥If there is input from DV Terminal, a multi screen cannot be created.

≥When signals are input from Video Input/Output Jack or Audio-Video Input/Output Jack, a multi screen cannot be re-displayed.

≥Signals input from Video Input/Output Jack or Audio-Video Input/Output Jack cannot be displayed on a multi screen.

ªListening to Playback Sound Through Headphones (l28)

If you want to listen to the playback sound of a tape through headphones, set [AV JACK] on the [AV IN/OUT SETUP] Sub-Menu to [OUT/PHONES] and connect the headphones to the [PHONES] Jack on this Camera/Recorder. In this case, no sound (including a warning sound and shutter sound) will be reproduced through the built-in speaker of the Camera/Recorder. When the A/V Cable is inserted into the AV Jack, the internal speaker works.

ªSelecting the Sound during Playback

(l28, 33)

You can select the sound by using the [AUDIO OUT] on the [PLAYBACK FUNCTIONS] Sub-Menu.

STEREO: Stereo Sound (main sound and sub sound)

L:Left channel sound (main sound)

R:Right channel sound (sub sound)

≥If you dub a tape recorded at the [12bit] selected as the [AUDIO-REC] setting, playback sound becomes stereo sound regardless of whether [AUDIO] is set to [MIX] or to [AUDIO OUT].

ªAudio Dubbing (l33)

≥The blank section of a tape cannot be dubbed.

≥Sounds sent through the DV Terminal cannot be dubbed.

≥If a tape has a non-recorded portion when the tape is dubbed, images and sounds may be disturbed when this

portion of the tape is played back.

≥If you set the tape counter back to 0 at the position where

you want to stop Audio Dubbing so as to make it possible to use the Memory Stop function (l52), Audio Dubbing is terminated automatically when the tape reaches this position.

≥In the case of importing data recorded with Audio Dubbing to a Computer using the Computer’s software program, only the original sound (ST1) may be imported, depending on the software program.

Microphone Jack

When audio dubbing is carried out through an external microphone or audio equipment, connect it to the [MIC] Jack. In this case, the built-in microphone of the Camera/Recorder will be turned off.

ªCard Functions (l34 - 39)

≥Do not touch the connector terminal located on the back of the card.

≥If the Card Slot Cover is open, the card cannot be accessed. ≥Wide images cannot be recorded on the Memory Card. ≥A card that was formatted with this Camera/Recorder may

not be usable in other equipment. If this happens, please format the card with the equipment with which the card is to be used. Before proceeding with this operation, we suggest that you take the precautionary measure of storing

important images in your personal computer.

≥In the Card Photoshot mode, the Camera/Recorder automatically saves the file names (Imga0001.jpg, etc.) along with the pictures. A file name is recorded with each picture as a running number.

ªRecordingtoaCardfromotherequipment

(l34, 41)

If you set the [TAPE/CARD] Selector to [CARD], you can use the Card Photoshot Function for externally input signals. (Not during recording.)

≥Black streaks may appear at the four edges of the image. ≥When the [PHOTO SHOT] Button is pressed, the image may seem to move backward momentarily, but this does

not affect the recording.

ªCard Photshot Recording (l34)

≥The Progressive Function is set to [ON]. ≥The shutter speed becomes 1/60-1/500.

≥When viewed on a TV or liquid crystal monitor, image quality deteriorates slightly.

≥The screen becomes slightly wider.

≥Mega-pixel images cannot be recorded on a cassette as a Mega-pixel picture.

ªLow Light Shot (l34)

≥When recording in low-light conditions, set [LOW LIGHT SHOT] to [AUTO]. When the Shutter Speed is 1/30, Low Light Shot operates and the [4CARD] Indication is displayed.

≥The brightness of the picture may change with Low Light Shot.

≥When Shutter Speed (l24) is set and Program AE (l23) is set, [LOW LIGHT SHOT] will not operate even if set to [AUTO].

ªCard Playback (l35)

≥In the case of displaying memory images on a Multi screen,

if there are 7 or more images, they cannot be displayed all at once. Rotate the [PUSH] Dial or use the [sSEARCH] Button or [rSEARCH] Button to display the next 6 still

pictures.

≥When pictures recorded by another Camera/Recorder are played back with this Camera/Recorder, the size of the pictures may be different from the recorded size.

ªTitle Functions (l37)

≥Regardless of the [PICTURE SIZE] setting, the size of created title picture is [640t480].

≥If you create an original title, the number of pictures that

can be recorded on the Memory Card decreases. ≥If the number of pictures that can be recorded on the

Memory Card is small, you may not be able to create an original title in some cases.

≥When a title is displayed in VCR Mode, the title is not output from the DV Terminal.

≥When the [TAPE/CARD] Selector is set to [CARD] and [1488t1128] is selected for [PICTURE SIZE], titles are not displayed.

ªDPOF setting (l39)

≥The number of prints can be set from 0 to 99.

≥Perform DPOF setting on the Camera/Recorder you are using.

≥It may take some time to verify the DPOF setting. Please wait until the [ACCESS] Lamp goes off.

ªUsing your Camera/Recorder with Digital Video Equipment (Dubbing) (l42)

≥Regardless of the setting, dubbing is carried out automatically in the same audio recording Mode as that of the Cassette in the playback-side equipment.

≥The images on the monitor of the recording side may be disturbed, but it does not affect the recorded images.

≥Even if Playback Digital Effects, Playback Zoom or Playback Title In have been used, these effects are not output from the DV Terminal.

≥Even if you use a device with DV Terminals (such as i.LINK), you may not be able to perform digital dubbing in some cases.

48