ªChanging the Counter Display Mode
By changing [C.DISPLAY] on the [DISPLAY SETUP] Sub- Menu, you can change the Counter Display Mode to Tape Counter Indication (0:00.00), Memory Counter Indication (M0:00.00), or Time Code Indication (0h00m00s00f).
≥You also can press the [COUNTER] Button of the Remote Controller repeatedly to change the Counter Indication.
ªDisplaying Date/Time Indication
To display Date/Time Indication, set the appropriate date/ time in [DATE/TIME] on the [DISPLAY SETUP]
≥You also can press the [DATE/TIME] Button of the Remote Controller repeatedly to display or change the Date/Time Indication.
ªChanging the Display Mode
By changing [DISPLAY] on the [DISPLAY SETUP] Sub- Menu, Counter Display Mode changes to All Function Display, Partial Display, and Minimum Display.
Warning/Alarm Indications
If any one of the following indications lights up or flashes, please check the condition of the Camera/Recorder.
EJECT TAPE: | After the [DEW DETECTED] |
| Indication appears, eject the |
| Cassette. |
YCHECK REC TAB : The erasure prevention tab on the inserted Cassette is open (that is, set to [SAVE]).
YCANNOT REC : When you are attempting to do audio dubbing on the unrecorded (blank) portion of the tape, or you are attempting to do dubbing
on the Cassette whose tab is set at [SAVE]. (l33, 41, 42)
YTAPE NOT INSERTED:
No Cassette is inserted. (l13)
XLOW BATTERY: The Battery is low. Recharge it. (l12)
0: | The internal lithium battery is low. |
| (l19) |
2END/TAPE END: The tape ended during recording.
REMOTE/
CHECK REMOTE MODE:
Wrong Remote Controller Mode has been selected. (l11)
CANNOT REC LP-MODE:
Because the original recording was done in LP Mode, audio dubbing cannot be performed. (l33)
INCOMPATIBLE DATA:This Cassette is incompatible or contains
Because the medium is protected by a copy guard, images cannot be recorded correctly.
INCOMPATIBLE TAPE:When an incompatible Cassette is detected, this Indication will appear for approximately 5 seconds.
°:If this Indication appears, return the LCD Monitor to the original position in order to check the specific content of the Warning/Alarm Indication.
AV INPUT RECORDING:
| When you are attempting to record |
| on the Memory Card during dubbing |
| (l41) on the Cassette. |
NO CARD: | There is no Memory Card inserted. |
PLEASE WAIT: | When reading the Memory Card |
| (playback, format, when using the |
| |
| (l35, 36, 39) |
CARD ERROR: | The Memory Card is not compatible |
| with the Camera/Recorder. |
CARD DOOR OPENED: | |
| Card Slot Cover is opened. After |
| inserting the Memory Card correctly, |
| close the Card Slot Cover. |
CHANGE TO TAPE MODE: | |
| When you are attempting to record |
| on the Memory Card in the Card |
| Playback Mode. Change to the VCR |
| Mode or slide the [TAPE/CARD] |
| Selector to [TAPE]. |
CHANGE TO CARD MODE: | |
| When you are attempting to record |
| on the Cassette in the VCR Mode. |
| Change to the Card Playback Mode |
| or slide the [TAPE/CARD] Selector |
| to [CARD]. |
FILE LOCKED: | When you are attempting to delete a |
| locked picture. The locked picture |
| cannot be deleted. |
WRITE PROTECTED: When you are attempting to write
| the data on an SD Memory Card |
| whose write protection switch is set |
| at [LOCK]. |
NO PICTURE: | There are no pictures in the Memory |
| Card. |
NO TITLE: | There are no titles in the Memory |
| Card. |
NO SPACE LEFT: | When a Still Picture is transferred |
| from a Cassette to an already full |
| Memory Card. |
CHANGE TO 640a480:Titles cannot be displayed. | |
| (l37) Set to the [640a480]. |
t: | Pictures of a different format or |
| damaged pictures are being played |
| back. (l35) |
UNABLE TO WRITE: | If you are attempting to record the |
| title multi screen on the Memory |
Card in the Camera Mode or VCR Mode.
PUSH THE RESET SWITCH:
| If this Indication appears, press the |
| [RESET] Button. (l9) |
NEEDS TO BE SERVICED: | |
| If this Indication appears, take the |
| Camera/Recorder to a service |
| center for repair. |
U10: | Wait until the [DEW DETECTED] |
| Indication disappears. (l50) |
DEW DETECTED: | Condensation has occurred. (l50) |
U11: | Clean the Video head. (l50) |
:NEED HEAD CLEANING:
The video heads are dirty. (l50)
45
