1 CAMERAVCR CARD P.B.

MODE

1 ON OFF

POWER

BACK 3

LIGHT

FADE 2

SEARCH 2

PUSH4

VOL/JOG

3

BACK 1

LIGHT

1

SEARCH 2

PUSH2

VOL/JOG

AB

CD

!

 

R!

 

 

 

Playing Back

The recorded scene can be played back immediately after recording.

1Slide the [OFF/ON/MODE] Switch and set the Camera/ Recorder in the VCR Mode.

The [VCR] Lamp lights up. 1

2Press the [6] Button to rewind the tape.

Rewind the tape to the point where you want to start playback.

When the tape reaches the beginning, rewinding stops automatically.

3Press the [1] Button to start playback.

To Stop Playback

Press the [] Button 2.

If a Cassette recorded with copyright protection signals is played back, the screen becomes blue or displays mosaic-like noise patterns.

ªAdjusting the Sound Volume

Until the [VOLUME] Indication 3 appears, keep pressing the [PUSH] Dial 4. Then, rotate the [PUSH] Dial to adjust the volume. After the adjustment, press the [PUSH] Dial to make the [VOLUME] Indication disappear.

To adjust the volume with the Remote Controller, press the [T] or [W] Button to display the [VOLUME] Indication. Press the [T] Button to increase the volume or press the [W] Button to decrease the volume. The [VOLUME] Indication goes off 2 or 3 seconds after the adjustment is finished.

When the Playback Zoom Function is in use, the sound volume cannot be adjusted.

For other notes, see page 48.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Finding a Scene You Want to Play Back

ªCue/Review Playback

Cue Playback A

Keep the [5] Button 1 pressed during playback.

Review Playback B

Keep the [6] Button 2 pressed during playback.

For longer Cue or Review Playback, press the [5] Button or the [6 ] Button only briefly. As this locks the search function, you do not need to keep the button pressed for a long time.

To resume normal playback, press the [1] Button. During Cue and Review Playback, pictures with fast-moving subjects may contain mosaic-like noise patterns.

ªHyper Check Function

If you press the [5] Button during fast-forwarding of the tape or the [6] Button during rewinding of the tape, Cue Playback or Review Playback continues for as long as the Button is held down.

ªVariable Speed Search Function

The speed of Cue or Review Playback can be varied.

1During playback, press the [1] Button.

[1t!] Indication appears. C

2Rotate the [PUSH] Dial and select a desired search speed.

The following 6 playback speeds are available for the Variable Speed Search Function in both the fast-forwarding and rewinding directions. 1/5 t (slow playback, SP mode only), 1/3 t (slow playback, LP mode only),1 t, 2 t,

5 t, 10 t, and 20 t.

The same setting can be performed using the Remote Controller’s the [VAR.SEARCH] Button, the [π] Button and the [] Button.

Resuming Normal Playback

Press the [1] Button.

During Cue or Review Playback, fast-moving images may show mosaic-like noise patterns.

The sound is muted during search.

ªRepeat Playback

If you continue to press the [ 1] Button for 5 seconds or longer, the Camera/ Recorder switches to Repeat Playback Mode, and the [R !] Indication appears D. (To cancel Repeat Playback Mode, set the [OFF/ON/MODE] Switch to [OFF].)

28

Page 28
Image 28
Panasonic AG-EZ50UP operating instructions Playing Back, Finding a Scene You Want to Play Back