1
2 | 3 | CAMERA |
VCR | ||
CARD P.B. |
MODE
ON
OFF
1 POWER
4
2
OPEN / EJECT
3TOPUSHCLOSE
CAMERA | 5 |
VCR | |
CARD P.B. |
MODE
ON
OFF
4 POWER
| CAMERA |
| VCR |
| CARD P.B. |
6 | MODE |
ON | |
OFF |
POWER
5
BACK
LIGHT 7
SEARCH 6
CAMERAVCR 7
CARD P.B.
MODE
ON
OFF
POWER
8
Quick Guide
1Charge the Battery. (l12)
≥Connect the AC Cable to the AC Adaptor and AC Jack.
≥Attach the Battery to the AC Adaptor. (This will start the charging process.)
≥When the Charge Lamp [CHARGE] goes off, the Battery is fully charged.
≥Since the Battery will not be charged when the DC Cable is connected to the AC Adaptor, disconnect it.
2Attach the Charged Battery to the Camera/Recorder. (l12)
≥Attach the battery after tilting the Viewfinder upward.
3Turn the Camera/Recorder on. (l14)
≥Slide the 1 Switch to [ON]. (The [CAMERA] Lamp lights up.)
4Insert the Cassette. (l13)
≥Slide the 2 Lever to the right and pull down to open the Cassette
compartment cover. ≥Insert the Cassette.
≥Press the [PUSH/TO CLOSE] 3 to load the Cassette. ≥Close the lower compartment Cover.
5Start recording. (l20)
≥Press the 4 Button. (Recording starts.)
≥Press the 4 Button again to pause the recording.
To watch the Playback Picture
6Switch to the VCR Mode, rewind the tape, and play the tape back. (l28)
≥Slide the 5 Switch. (The [VCR] Lamp lights up.)
≥Press the 6 Button.
≥Press the 7 Button. (This will start playback.)
7Turn the Camera/Recorder off. (l14)
≥Set the 8 Switch to [OFF].
7
