Panasonic AG-EZ50UP Setting Date and Time, Internal Lithium Battery Recharge, LP Mode

CLOCK-SET

YEAR :2001

MONTH :OCT

DAY :10

HOUR : 2PM

MINUTE:30

PUSH MENU TO RETURN

	MENU	1, 3
PUSH		1, 2
VOL/JOG

	1	CAMERATUPFUNCTIONS
	2DIGITLMERA		FFECT
	3CARD
	4MULTI-
	5RECODINGSETUP
1	6DISPLAYSETUPUP
	7.OTHERPICTURESFUNCIONS
	REC-	PUSHRECORDINGMENUSP		TOSETUPEXITLP
2	AUIEXSPEEDO-RC12bit2HOUR
	WIND-CUT OFF			----
	RETURN
	REC-SPEDPUSHMENUSP			TOSETUPEXIT
	AUIO-RECORDING12bit				16bit
	INDEXWIND-CUT OFF2HOUR
	RETURN			----
		PUSHMENUTOEXIT

Setting Date and Time

1Press the [MENU] Button and rotate the [PUSH] Dial to select [OTHER FUNCTIONS] >> [CLOCK-SET] >> [YES].

2Rotate and press the [PUSH] Dial to select [YEAR]/[MONTH]/ [DAY]/[HOUR]/[MINUTE] and set it to a desired value.

≥Year will cycle in the order shown below. 2000 ) 2001 ) ... ) 2089 ) 2000 ) ...

3Press the [MENU] Button to finish setting the date and time.

≥The clock operation starts from [00] seconds.

≥The menu will disappear when the button is pressed again.

≥It is possible that the built-in clock in the Camera/Recorder may become inaccurate. Please check the time before recording. If the [0] Indication is flashing, charge the internal lithium battery and reset the date and time.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Internal Lithium Battery Recharge

The internal lithium battery sustains the operation of the clock. When the [0] Indication is lit, the internal lithium battery is near exhaustion.

1Connect the AC Adaptor to the Camera/Recorder with the power turned off and then connect to the AC Jack.

≥After charging for 4 hours, the built-in lithium battery can power the clock for approximately 3 months.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

LP Mode

A desired recording speed can be selected with [REC-SPEED] on the [RECORDING SETUP] Sub-Menu. 1

If LP Mode is selected, the recording time becomes 1.5 times longer than that of SP Mode.

Although the image quality does not decrease with the LP Mode recording, mosaic-like noise patterns may appear on a playback image, or some functions may be restricted.

≥The contents that are recorded in LP Mode are not completely compatible with other equipment.

≥Audio Dubbing is not possible with LP Mode. (l33)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Audio Recording Mode

The sound quality of the recorded sound can be selected with [AUDIO-REC] on the [RECORDING SETUP] Sub-Menu. 2

High quality sound recording is possible with “16bit 48kHz 2 track” Mode. With the “12bit 32kHz 4 track” Mode, the original sound can be recorded on 2 tracks in stereo, while the other 2 tracks can be used for re-recording.

19