Panasonic AG-EZ50UP Imagescannotbeplayedbackevenwhenthe1Button, Is pressed, Performed, L36

If you are experiencing a problem with your Digital Camera/Recorder, it may be something you can correct yourself. Check the list below for Problems and Solutions.

Problems	Solutions
Imagescannotbeplayedbackevenwhenthe[1]Button	Is the [VCR] Lamp on? If the [VCR] Lamp is not on, the
is pressed.	playback function cannot be used.
Mosaic-like noise patterns appear on images during	This phenomenon is characteristic of digital video systems. It
Cue, Review or Slow Motion Playback.	is not a malfunction.
AlthoughtheCamera/Recorder iscorrectlyconnectedto	Have you selected Video Input on the TV? Please read the
a TV, playback images cannot be seen.	operating instructions of your TV and select the channel that
	matches the input jacks used for the connection.
Playback image is not clear.	Are the heads of the Camera/Recorder dirty? If the heads
	are dirty, playback image cannot be clear.
No sound is played back from the built-in speaker or	Is the volume too low? During playback, continue pressing
headphones of the Camera/Recorder.	the [PUSH] Dial until the [VOLUME] Indication appears.
	Then, rotate the [PUSH] Dial to adjust the volume.
Different sounds are reproduced at the same time.	[AUDIO] on the [PLAYBACK FUNCTIONS] Sub-Menu of the
	[VCR FUNCTIONS] Main-Menu has been set to [MIX]. As a
	result, the original sound and sound that was recorded by
	audio dubbing are played back together. It is possible to
	reproduce the sounds separately.
The originalsound was erased whenaudio dubbing was	If you perform audio dubbing on a recording done in [16bit]
performed.	Mode, the original sound will be erased. If you want to
	preserve the original sound, be sure to select [12bit] Mode at
	the time of recording.
Sounds cannot be played back.	≥Although a Cassette with no audio dubbing is being played,
	is [AUDIO] on the [PLAYBACK FUNCTIONS] Sub-Menu of
	the [VCR FUNCTIONS] Main-Menu set to [ST2]? To play
	back a Cassette with no audio dubbing, [AUDIO] must be
	set to [ST1].
	≥Is the Variable Speed Search Function working? Press the
	[1] Button to cancel the Variable Speed Search Function.
The recorded picture on the Memory Card is not clear.	Do you have [REC MODE] on the [CARD SETUP] Sub-Menu
	set to [ECONOMY]? If recording is done with it set to
	[ECONOMY], a detailed image may show a mosaic pattern.
	Set the [REC MODE] to [NORMAL] or [FINE]. (l34)
Card Photoshot playback pictures do not look normal.	There is a possibility that the images are damaged.
	To prevent the loss of image data, we recommend that you
	back images up on a Cassette or personal computer.
	(l36)
Even if a Card is formatted, it cannot be used.	There is a possibility of damage to either the Camera/
	Recorder or the Card. Please contact Panasonic Call Center.

56