Selecting Speakers A and Speakers B
You can select to output sound from Speakers A, Speakers B, or both A + B.
SPEAKERS A B
1 Press SPEAKERS repeatedly on the integrated amplifier.
The LED of the selected speakers lights.
Note
•While headphones are connected, this setting is disabled.
•When “ROUTE” is set to “PRE”, this setting is disabled (➔ page 39).
•When this setting is set to A + B, the impedance of speakers is restricted. For further details, see “Connecting Your Speakers” (➔ page 13).
Adjusting the Volume
You can adjust the volume within the following range:
VOLMIN, -95dB, -90dB, -85dB, -80dB to 14dB,
VOLMAX
■Operating with the remote controller
VOLUME q/w
1 Press VOLUME q/wrepeatedly.
■Operating on the integrated amplifier
Volume controller
1 Use the volume controller.
Tip
• The default level is
En
27