Pitney Bowes DM900, DM800 manual Adjusting the Feeder Deck Sensor, Mailing System Setup

5 • Mailing System Setup

1SettingDisplaythe Language

2AdjustingDisplay Contrast

3Adjusting the Feeder Deck Sensor

Depending on the model of your mailing system, you may be able to set the display to any of the following languages:

•English

•Espanol

To change the language of the display:

1.Press the Menu key.

2.Select Set Up, or press 1 and the Enter key.

3.Select Change Language, or press 4 and the Enter key.

4.Select the language you want to appear in the display.

•Press 1 for English.

•Press 2 for Espanol.

5.Press the Enter key.

You can adjust the contrast of your display and set the volume (1D00 only) of the speaker on your mailing system.

To adjust the contrast level of your display:

1.Press the Menu Key.

2.Press the down arrow key and then select Adjust Display Contrast, or press ? and the Enter key

3.Use the left or right arrow keys on the control center to select the con- trast (1 - 9) you want. The screen updates to the new setting.

4.Press the Enter key to save this setting.

The feeder deck sensitivity adjustments improve mail piece sensing capa- bilities on DM800™, DM900™ mailing systems, eliminating the need to press down on the hopper mail stack to activate the feeder.

1.Press the Menu Key.

2.Press the down arrow key and then select Adjust Feeder Deck Sensor.

•Press the right arrow key to view specific instructions about sensi- tivity adjustments.

•Select Increase by 1 to increase the sensitivity of the Hopper Sen- sor.

•Select Decrease by 1 to decrease the sensitivity of the Hopper Sensor.

•Select Return to Factory Default to set the Hopper Sensor to the default setting.

3.Press the Enter when done.

5-4 SV60861 Rev. F