Pitney Bowes DM900, DM800 manual Performing Updates or Adding Features, Maintaining and Updating

9 • Maintaining and Updating

Performing Updates or Adding Features

7.Slide the assembly to the left and lift it out.

8.Remove the new wiper blade assembly fromthe package.

9.Place the new wiper blade directly into the wiper blade slot with the shaft end to the right. Slide the wiper blade to the right until it clicks into place.

9. Close the main cover.

Your IntelliLink® Control Center can remotely turn on features or download graphic files to print on envelopes. To activate a new feature, feature upgrade, or to download an envelope advertisement or inscription, you will be instructed by a Pitney Bowes representative to connect to the Intel- liLink® infrastructure.

NOTE: You must first purchase a new feature and graphic before downloading it remotely.

Ensure your system is connected to a LAN or phone line as you do when refilling postage.

To initiate this process, simply follow the steps to “Get Update Now.”

1.Press the Menu key.

2.Select Set Up, then press the down arrow key and select Updates and Add-Ons.

3.Select Check for Updates. The Requesting Update... screen appears.

4.Once the system has connected with Pitney Bowes, the Software Update Available screen appears. Select Get Update Now.

NOTE: You have 15 seconds to select this option. If you do not select the option within 15 seconds, the system will proceed with download process.

When the download process is complete, the system will return to the Main screen. Advertisements and inscriptions are added to the memory of your system, and will be listed on the display under Meter Stamp Options. New features and feature upgrades will be resident in the software capabilities of your system, and can be selected from appropriate menus.

9 - 12 SV60861 Rev. F