Pitney Bowes manual Running the Mail, DM800, DM900 Digital Mailing System Operating Guide

Thin Mail

Setting

Thick Mail Setting

Sealer

Lever

Normal Mail Setting

DM800™, DM900™ Digital Mailing System Operating Guide

Running the Mail

4. Set the sealer lever. Push lever to the right for sealing or to the left for postcards and mail you do not want sealed.

5. Use the thickness adjustment knob to adjust for envelope thickness.

• For thicker pieces of mail (3/8” to 5/8”), or mail contain- ing several inserts, use the thick mail setting. For most mail under 3/8", use the nor- mal mail settings.

• For large stacks of thin mail, such as single inserts or post cards, the thin mail setting may be needed for better performance. Refer to the figure on the right.

To pick asetting, turn the knob to the arrow located on the feed cover.

6.Make sure you have sufficient funds in your postage meter. If the mes- sage “Low Funds” appears on the screen, make sure you can complete the mail run with the funds you have. If you do not have enough funds, see Chapter 6, Adding Postage in this guide.

1.Press the Mode key on the IntelliLink® Control Center.

2.Select Key In Postage.

3.Key in the correct postage value using the numeric keys on the control center, then press Enter.

4.Place the piece of mail on the feed deck and press the Start key.

NOTE: The “Auto-On” (DM900™ only) feature allows you to process mail with- out pressing the Start key after you place mail on the feed deck. The IntelliLink® Control Center will advise you of the mailing stage you are in.

SV60861 Rev. F 3-3