Pitney Bowes DM800, DM900 manual Connecting Your Mailing System to a Remote Analog Phone Line

Internal analog line

AC Adapter Plug

DM800™, DM900™ Digital Mailing System Operating Guide

2ConnectingYour Postage Meter to an Analog Phone Line

Connecting Your Mailing System to a Remote Analog Phone Line

Which connector do I use?

Internal Analog Phone Line Connector - Use the internal analog modem to connect directly to an analog phone line.

If your mailing system is not located near an analog phone line and you need to remove the control center when you perform feature updates or add postage, refer to Connecting Your Postage Meter to a Remote Analog Line in this section.

Internal Analog Phone

Line Connector

Use this to connect directly to an analog phone line

If you need to connect to an analog phone line that is not located near your mailing system, you can remove the IntelliLink® Control Center and move it to a location near the analog phone line. At the remote location, plug one end of the AC Adapter (P/N 1C85005) into the back of the control center and the other end into an AC outlet.

To remove the control center and move it to another location:

1. Turn off the power to the mailing system.

2. Pull the blue lever at the right of the control center towards you.

3. Slide the control center forward to remove it.

4. Take the control center to where the analog phone line is.

5. Connect the telephone cord (AWG 26) from the internal analog connec- tor to the analog telephone line.

6. Connect the A/C Adapter (P/N 1C85005) to the back of the control cen- ter and plug it into an AC outlet.

7. Add or check your postage funds as described inChecking Your

Postage By Phone® Meter Payment System Account Bal- ance in this chapter.

8. Unplug the telephone cord and the A/C Adapter.

9. Reinstall the IntelliLink® Con- trol Center by sliding it into the docking station on top of the mailing system until you hear it click into place.

10. Turn the power back on.

SV60861 Rev. F 6-5