Pitney Bowes DM900, DM800 manual Timeouts Display Sleep Timeouts Sleep, Mailing System Setup

5 • Mailing System Setup

12ConfiguringSystem Timeouts

This section describes how to set various system timeouts for your mailing system.

1.To access the system timeouts, press the Menu key on the control center, and select Set Up.

2.Select Basic Settings and then Time-

outs to get all of the timeout options. The timeout options are listed on the right. All of these options are described in the fol- lowing sections.

Standby Mode: Least Power Usage

Timeouts

Display Sleep

System Sleep

Normal Preset Timer

Feeding Timeout

Transaction Timeout

Timeouts: Display Sleep

Timeouts: Sleep

In order to reach the lowestlevel of power consumption, the mailing system can be manually switched "Off" while still plugged into the wall. Toggle the "On/Off" switch to "Off" when not using the mailing system for an extended period of time. When switched back "On" expect some delay for a normal reboot to assure that the entire system is ready to go.

This option allows you to specify how long the system can remain inactive before the display turns off. You can set the timeout for 1 - 30 minutes, in 1 minute increments. The default timeout is 5 minutes.

The display turns on again when you press any key on the control center or if you place mail in the feeder or on the scale (either integrated or attached external scale).

1.Press the Menu key and select Set Up.

2.Select Basic Settings and then Timeouts.

3.Select Display Sleep.

4.Enter the number of minutes (1-30) using the numeric keyboard.

5.Press the Enter key.

The "sleep" mode will save money, and help protect the environment. Use this option to specify how long the system remains inactive before it goes into "sleep".

You can set this timeout for 40 - 240 minutes, in 1 minute increments. The default timeout is 10 minutes.

The system goes into display sleep before it goes into system sleep. The system wakes up again when you press any key on the control center or if you place mail in the feeder or on the scale (either integrated or attached external scale).

1.Press the Menu key and select Set Up.

2.Select Basic Settings and then Timeouts.

3.Select System Sleep.

4.Enter the number of minutes (40 - 240 minutes) using the numeric key- pad.

5.Press the Enter key.

5-18 SV60861 Rev. F