Pitney Bowes manual DM800, DM900 Digital Mailing System Operating Guide

DM800™, DM900™ Digital Mailing System Operating Guide

Connectors on the Back of the IntelliLink® Control Center

•Internal Analog Phone Line Connector - The IntelliLink® Control Center has an internal analog modem and can connect directly to an analog phone line. The term analog phone line refers to a RJ11C or RJ11W compatible (single line) telephone wall plug typically used for a residential phone or facsimile hookup.

•IntelliLink® Control Center AC Adapter Receptacle - The receptacle for the AC adapter is located on the back of the IntelliLink® Control Center. If you need to remove the control center from the mailing sys- tem base and move it to an analog telephone line, you plug the AC adapter into this receptacle. When the control center is connected to the mailing system base, access to the AC adapter is blocked as indi- cated by the dotted line in the picture below.

Analog Phone Line

Connector (on base)

Use this to connect directly to an analog phone line

IntelliLink® Control Center installed on a DM Series™ System base. Dotted line indicates AC Adapter Receptacle is covered by base

SV60861 Rev. F 2 - 11