Pitney Bowes DM900, DM800 manual Important Information About Powering Off, On Off, No No No Yes

1 • Read This First

•Be certain the area in front of the wall receptacle into which the machine is plugged is free from obstruction.

•To prevent overheating, do not cover the vent openings.

•Read all instructions before attempting to operate the equipment.

•Use this equipment only for its intended purpose.

If your stacker has an AC adapter to power the stacker:

•Use only the AC adapter designed specifically for the stacker and shown in Chapter 11, Supplies and Options. Third-party AC adapters may damage the stacker.

•To protect against electrical shock, plug the AC adapter power cord into a properly grounded wall outlet.

Do not route the AC adapter cable over sharp edges or trap it between furniture.

NOTE: Always follow the specific occupational safety and health standards for your workplace.

Important Information About Powering Off

Your DM Series™ Digital Mailing System

Your DM Series™ Digital Mailing System is designed to remain powered on at all times. This is necessary so that the printer station can perform the required maintenance it needs to maintain peak performance.

Your DM Series™ System has a power switch (for the location, refer to Chapter 2, page 2-6) so that you can properly remove power to the system.

If you need to power off your system, you must use the power switch. When you power off the system, the system immediately moves the printhead back to the capping station to keep the printhead from drying out.

Powering off your system by any other means, such as a wall switch, a power strip, or unplugging from a wall outlet, will result inhigher than normal ink consumption and could damage your mailing system.

ON

OFF

NO NO NO

YES

1 - 6 SV60861 Rev. F