E43
CALLER ID FEATURES

Calling a party from the Caller ID list

Standby Mode
1When the phone is in standby mode, select the
Caller ID message (see "Viewing the Caller ID List"
on page E41).
2To have the phone dial a "1" before the displayed Caller ID number,
press /TONE/ . To have the phone dial the stored area code before
the displayed Caller ID number, press #/ .
3Press TALK/FLASHor SPEAKER. The displayed phone number dials
automatically.
Talk Mode
1When the phone is in talk mode, select the Caller ID message you want to
dial (see "Viewing the Caller ID List" on page E41).
2Press the DIALsoft key, and the number will be dialed.

Storing Caller ID messages in the Phonebook

Messages shown in the Caller ID list can be stored in the phonebook.
The phone number and name of the party on the Caller ID list can be stored
in memory.
1When the phone is in standby mode, select the Caller ID message to be
stored.
Then press the STOREsoft key.

Store/Edit Name

appears. If the Caller ID
message is already stored in memory, you will hear a beep and

This

data is already stored!!

appears. The number will not be stored.
2To complete the setting, follow the steps 3-8 in "Phonebook (Storing
Phone Numbers, Names, Distinctive Rings, and Speed dial)" on page E31.
Using the Caller ID Message List
12/21 12:30PM
Jane Smith
214-555-1234
BACK DELETE STORE
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 43