BASICS
Using One Touch Voice Mail Access
If you subscribe to voice mail service, you can use your phone to access your voice mailbox. The new message LED flashes whenever you have messages waiting in your voice mailbox.
Just program the handset with your access number, and you can get your messages at the touch of a button on the handset. (The voice mail service provider will supply you with the access number. This number may be simply a phone number. Refer to the provider's literature.)
To program or delete your Voice Mail Access Number, see page E17.
Dialing your Voice Mail Service
Once you've programmed your personal access number, you can dial your mailbox with the touch of a button. When you have messages, simply press the 
soft key. If you have not entered the access number or it has been deleted, when you press the 
soft key, No Number Stored To store number press [MENU] appears and you will hear a beep. The phone returns to standby mode.
Resetting the New Message LED
The LED flashes when you have new messages in the voice mail service.
If the LED remains on after you've retrieved your messages, you may need to reset the indicators. With the phone in standby mode, press and hold PAGE on the base until the paging sound stops (about 5 seconds).
Note:
•You must subscribe to voice mail service from your telephone company in order to use this feature. The voice mail service company will provide you with the access number.
E30
