Cisco Systems OL-7821-04, SCE 1000 2xGBE manual Tools and Parts Required

Models: SCE 1000 2xGBE OL-7821-04

1 131
Download 131 pages 61.9 Kb
Page 42
Image 42
Tools and Parts Required

Chapter 4 Installation and Maintenance

Preparing to Install the SCE 1000 Platform

Figure 4-1: SCE 1000 Measurements

Table 4-1 SCE 1000 Dimensions

Dimension

Measurement

Height

Width

Depth

Weight

3.47inches (9.5 cm)

17.4inches (4.43 cm) 18 inches (4.6 cm) 33 lb (15 kg)

Tools and Parts Required

The SCE 1000 chassis is fully assembled at the factory, including the application and software packages. No assembly is required. However, you need the following tools and equipment to install the SCE 1000 chassis and the rack-mount kit (if installing the SCE 1000 platform in a rack), fan modules, and power supplies:

Number 1 and 2 Phillips screwdriver

1/4 inch flat-blade screwdriver

#¼” Hex Wrench

Screws compatible with your rack (for mounting the SCE 1000 to the rack)

12 AWG or 2.5-mm copper installation wire with hex or loop connectors for DC power leads Ring terminals must be UL approved and suitable for 12 AWG wire.

Level (optional)

Tape measure (optional)

Appropriate cables to connect the SCE 1000 to the network and console terminal

Rack-mounting kit (optional)

A new AC-input or DC-input power supply

A new fan module

Cisco SCE 1000 2xGBE Installation and Configuration Guide

4-2

OL-7821-04

 

 

 

 

Page 42
Image 42
Cisco Systems OL-7821-04, SCE 1000 2xGBE manual Tools and Parts Required